To Next PageTo Next Page
Need help?Do you have a question about the Makita DTD157 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 140 Nm |
| No Load Speed | 0 - 3, 000 RPM |
| Impacts Per Minute | 0 - 4, 100 IPM |
| Driving Shank | 1/4" Hex |
| Battery | 18V LXT Lithium-Ion |
Lists compatible Makita battery cartridges and chargers for the tool.
Defines the purpose of the tool for screw driving in various materials.
Details the A-weighted noise levels (sound pressure and power) and uncertainty.
Provides vibration emission values for impact fastening and its uncertainty.
Covers essential safety precautions for all power tools.
Specific safety instructions for operating cordless impact drivers.
Step-by-step guide for inserting and removing the battery cartridge.
Explains how to check the battery level using indicator lamps.
Details automatic power cut-off for overheat and overdischarge protection.
Operation of the switch trigger and the electric brake function.
How to change the tool's rotation direction using the reversing switch lever.
Describes changing the impact force in three steps: hard, soft, and A mode.
Instructions for inserting and securing driver bits and socket bits.
Guide on attaching the tool hook to the housing for temporary hanging.
Explains fastening torque based on time, bolt type, and operating factors.
