8 ENGLISH
overloaded. Then turn the tool on to restart.
Protection lock function
In this situation, the tool does not start even if turning the tool
CAUTION: -
Fig.2: 1. Slide switch
Fig.3: 1. Dial
NOTE:
CAUTION:
Slide the slide switch toward the "I (ON)" position to
light up the front lamp. The lamp keeps on lighting while
the switch is the "I (ON)" position.
The front lamp goes out 10 seconds after sliding switch
Fig.4: 1.
NOTE: When the overheat protection or the protec-
-
Electronic function
The tool is equipped with the electronic functions for
Constant speed control
stroke rate regardless of load conditions.
Soft start feature
Soft start feature reduces starting reaction.
function
switch in the "I (ON)" position, the tool does not start.
position.
ASSEMBLY
cartridge
CAUTION:
CAUTION: -
cartridge.
Fig.5: 1. Red indicator 2. Button 3.
CAUTION:
If not,
CAUTION:
CAUTION:
To Next Page
Loading...
