Makita DTW701RTJ User Manual

9 ENGLISH
Changing the application mode
Thistoolemploysseveraleasy-to-useapplicationmodesfordrivingboltswithgoodcontrol.
Thetypeoftheapplicationmodechangeseverytimeyoupressthebutton
.
Youcanchangetheapplicationmodewithinapproximatelyoneminuteafterreleasingtheswitchtrigger.
NOTE:Youcanextendthetimetochangetheapplicationmodeapproximatelyoneminuteifyoupressthebut-
ton
or .
Application mode
(Assist type displayed on panel)
Feature Purpose
Bolt mode Clockwise
This mode helps to repeat screw-
drivingcontinuouslywithequal
torque. This mode also helps to
reduce the risk of breakage of
bolts/nuts due to overtightening.
Counterclockwise
This mode helps to prevent a
boltfromfallingo󰀨.Whenloos-
ening a bolt with the tool driving
in counterclockwise rotation,
thetoolautomaticallystopsor
slows down after the bolt/nut
gets enough loosened.
NOTE:
The timing to stop the driving
varies depending on the type
of the bolt/nut and material to
be driven. Make a test driving
before using this mode.
Clockwise
Preventing over tightening of
bolts.
Counterclockwise
Loosening bolts.
Bolt mode (1)
Clockwise
Thetoolstopsautomaticallyas
soon as it has started impact
blows.
Counterclockwise
The impact force is 4. The tool
stopsautomaticallyassoonas
it has stopped impact blows.
–
Bolt mode (2)
Clockwise
Thetoolstopsautomatically
approximately0.5secondlater
from the moment that the tool
has started impact blows.
Counterclockwise
The impact force is 4. The tool
stopsautomaticallyapproxi-
mately0.2secondlaterfrom
the moment that the tool has
stopped impact blows.
–

Makita DTW701RTJ Specifications

General

Brand	Makita
Model	DTW701RTJ
Category	Power Tool
Language	English