17
Instructions for periodic maintenance
To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance
must be performed regularly.
Warranty claims can be recognized only if this work is performed regularly and properly. Failure to perform the pre-
scribed maintenance work can lead to accidents!
The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All
such work must be carried out by authorized service centre.
014813
Operating time
Item
Before
operation
Everyday
Every
week
Every 3
month
Annually
Before
storage
Chain Saw
Inspection.
Cleaning.
Check at authorized service
center.
Saw chain
Inspection.
Sharpening if necessary.
Guide bar
Inspection.
Remove from the chain saw.
Chain lubrication Check the oil feed rate.
Switch trigger Inspection.
Lock-off button Inspection.
Oil tank cap Check tightness.
Chain catcher Inspection.
Screws and nuts Inspection.
To Next Page
Loading...
Need help?
General
