Why is my Makita Chainsaw having abnormal vibration?
If you experience abnormal vibration with your Makita Chainsaw, stop the machine immediately! Check if the guide bar or saw chain is loose and adjust the tension. If the issue persists, it could be a tool malfunction, requiring repair from an authorized service center.
What to do if chain does not stop even the chain brake is activated on my Makita DUC252 Chainsaw?
If the chain on your Makita Chainsaw doesn't stop even when the chain brake is activated, stop the machine immediately! This could be due to a worn-down brake band, which requires repair from an authorized service center.
Why doesn't my Makita Chainsaw reach maximum RPM?
If your chainsaw isn't reaching maximum RPM, there could be a few reasons. First, ensure the battery cartridge is installed correctly as described in this manual. Also, the battery power might be dropping, so try recharging the battery cartridge, and if that doesn't work, replace it. If these steps don't resolve the issue, it's possible that the drive system isn't working correctly.
Why does my Makita Saw chain not run?
The chain might not be running because the chain brake is activated. To resolve this, release the chain brake.
Why is there no oil on the chain of my Makita Saw?
If there's no oil on the chain, it could be due to a few reasons: * The oil tank might be empty, so fill it up. * The oil guide groove could be dirty; try cleaning it. * The oil delivery might not be adjusted correctly, so adjust the amount of oil delivery.
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Battery Voltage | 18V |
| Automatic Oiler | Yes |
| Bar Length | 25 cm |
| Chain Gauge | 1.1 mm |
| Chain Pitch | 3/8 inch |
Provides crucial safety instructions applicable to all power tools.
Emphasizes staying alert and using common sense during operation.
Details essential PPE for reducing personal injury risks.
Using correct battery packs and preventing short circuits.
Precautions for handling battery leakage and damage.
Keeping body parts away from the chain and correct hand grip.
Avoiding electric shock and wearing essential safety equipment.
Maintaining footing, handling tension, and preventing kickback.
Requirements for trained operators and specific usage warnings.
Chain brake activation, starting, cutting, and environmental factors.
Appropriate clothing, helmets, and eye/face protection.
Instructions for safe use, charging, storage, and disposal.
Explanation of overload, overheat, and overdischarge protection.
Burrowing, parallel-to-grain cuts, and tree felling.
Operator safety, tree assessment, and environmental factors.
Importance of the hinge and planning escape paths.
Solutions for common starting, running, and power issues.
Solutions for chain not stopping or abnormal vibration.
To Next Page
