To Next PageTo Next PageWhy my Makita Chainsaw does not start?
If your Makita Chainsaw doesn't start, it might be due to several reasons. First, ensure a charged battery cartridge is correctly installed. Second, the battery might have low voltage and needs recharging or replacement. Finally, check if the main power switch is turned on, as the chainsaw automatically turns off after a period of inactivity.
What to do if the saw chain of my Makita DUC254RTE Chainsaw does not run?
If the chain on your Makita Chainsaw does not run, the chain brake may be activated. Release the chain brake to allow the chain to move freely.
What to do if Makita DUC254RTE motor stops running quickly?
If the motor of your Makita chainsaw stops running after a short period, the battery's charge level might be low. Try recharging the battery cartridges, and if that doesn't work, replace the battery cartridge.
Why is there no oil on the chain of my Makita Chainsaw?
If there is no oil on the chain of your Makita Chainsaw, start by checking if the oil tank is empty and fill it if needed. Also, the oil guide groove might be dirty, so clean it. If the oil delivery is poor, adjust the amount of oil delivery with the adjusting screw.
What to do if there is no oil on the chain of Makita DUC254RTE?
If there's no oil on the chain of your Makita Chainsaw, the oil tank might be empty, so fill it up. Another possibility is a dirty oil guide groove, which you should clean. Also, check and adjust the oil delivery with the adjusting screw if the oil delivery is poor.
Why the saw chain does not run on my Makita DUC254RTE?
If the saw chain on your Makita Chainsaw isn't running, it's likely that the chain brake is activated. Release the chain brake to allow the chain to run.
Why won't my Makita Cordless Saw start?
Your Makita Cordless Saw might not start due to several reasons: the battery cartridge may not be installed (install a charged battery cartridge), the battery may have low voltage (recharge or replace the battery), or the main power switch is off (turn on the main power switch again, as the saw automatically turns off after a period of inactivity).
What to do if my Makita Cordless Saw chain is not running?
If the saw chain on your Makita Cordless Saw isn't running, it's likely that the chain brake is activated. Release the chain brake to allow the chain to run.
How to troubleshoot a Makita Cordless Saw that won't start?
If your Makita Cordless Saw doesn't start, here are a few things to check: * Ensure a charged battery cartridge is correctly installed. * Recharge the battery. If it remains ineffective, consider replacing the battery cartridge. * If the main power switch is off (the chainsaw automatically turns off after a period of inactivity), turn it on again.
General
