To Next PageTo Next PageWhy does my Makita DUX18 motor stop running after a little use?
The motor may stop running after a short time due to a low battery charge or overheating. Recharge the battery, and if that doesn't work, replace it. If overheating is the issue, stop using the tool and allow it to cool down.
What to do if my Makita DUX18 Power Tool does not reach maximum RPM?
If your Makita Power Tool isn't reaching its maximum RPM, the battery may be installed improperly or its power may be dropping. Ensure the battery cartridge is correctly installed as described in the manual. If the battery power is dropping, recharge it; if recharging isn't effective, replace the battery.
How to troubleshoot a Makita Power Tool when the motor does not run?
If the motor of your Makita Power Tool isn't running, it could be due to several reasons: the battery cartridge might not be installed, or the battery could have an undervoltage issue. Ensure the battery cartridge is properly installed. If the battery has an undervoltage problem, recharge it; if recharging doesn't work, replace the battery.
What to do if my Makita Tools motor does not run?
If your Makita Tools motor isn't running, first ensure the battery cartridge is correctly installed. If it still doesn't run, the battery might be low or faulty; try recharging it, and if that doesn't work, replace the battery. If the issue persists, it could be a problem with the drive system, in which case you should seek repair at your local authorized service center.
Why does my Makita Tools motor stop running after a little use?
If your Makita Tools motor stops running after a short period, it's likely due to a low battery. Try recharging the battery, and if that doesn't solve the problem, consider replacing it. Another possibility is overheating; if this is the case, stop using the tool and allow it to cool down.
How to fix Makita Tools when it does not reach maximum RPM?
If your Makita Tools isn't reaching maximum RPM, first ensure the battery cartridge is properly installed as described in the manual. If the issue continues, the battery power may be dropping, so try recharging it, and replace it if recharging isn't effective. If the problem persists, the drive system may not be working correctly, and you should consult an authorized service center for repair.
Why won't my Makita Brush Cutter motor run?
If your Makita Brush Cutter's motor isn't running, first ensure the battery cartridge is correctly installed. If the battery is low, recharge it, and if that doesn't work, replace the battery. If the issue persists, it may indicate a problem with the drive system, requiring repair by an authorized service center.
What to do if my Makita Brush Cutter motor stops after a little use?
If your Makita Brush Cutter stops running soon after you start using it, the battery charge level may be low, so try recharging the battery, and if that doesn't work, replace the battery. Also, overheating can cause this issue, so allow the tool to cool down before using it again.
How to fix a Makita Brush Cutter that does not reach maximum RPM?
If your Makita Brush Cutter isn't reaching its maximum RPM, ensure the battery cartridge is properly installed. A dropping battery can also cause this, so recharge or replace the battery. If these steps don't resolve the issue, the drive system may need repair by an authorized service center.
General| Brand | Makita |
|---|---|
| Model | DUX18 |
| Category | Power Tool |
| Language | English |
Crucial safety precautions applicable to all power tools.
Specific safety guidelines for operating this power tool.
Recommends essential PPE for safe operation.
Provides specific techniques to prevent kickback during use.
Critical safety rules for handling and using battery cartridges.
Details how the tool protects against overheating and battery over-discharge.
