What to do if my Makita DX02 has unusual dust emission?
If your Makita Power Tool is emitting an unusual amount of dust, it could be due to a full dust container. Try emptying the dust container. Alternatively, the sealing cap might be worn or damaged, in which case you should replace it.
Overview of the dust extraction system components and their functions.
Explanation of symbols used for warnings and instructions in the manual.
Procedures for attaching and detaching the dust extraction system from the power tool.
How to adjust the tip protrusion for different drill bit lengths.
Method for setting the desired drilling depth using the depth gauge.
Instructions for proper drilling technique with the dust extraction system attached.
Instructions for cleaning the dust extraction system attachment.
Steps for replacing the filter in the dust container.
Guidance on replacing the worn or damaged sealing cap.
General| Brand | Makita |
|---|---|
| Model | DX02 |
| Category | Power Tool |
| Language | English |
To Next Page
