M
Mr. Tyler Hernandez MDSep 7, 2025
What to do if Makita ER2650LH Trimmer engine does not stop?
- MMegan PopeSep 7, 2025
If the engine of your Makita Trimmer does not stop, check if the connector is detached and attach it securely.
To Next PageTo Next PageWhat to do if Makita ER2650LH Trimmer engine does not stop?
If the engine of your Makita Trimmer does not stop, check if the connector is detached and attach it securely.
Why is the nylon cutting cord not cut off at the correct length on my Makita ER2650LH?
If the nylon cutting cord is not being cut off at the correct length on your Makita Trimmer: * The cord extends past the protector. Rewind the cord.
What to do if my Makita Trimmer engine stops soon after starting?
If your Makita Trimmer engine stops soon after starting or the engine speed does not increase, consider the following: * Ensure you perform a sufficient warm-up operation. * Check that the choke lever is set to “?PE?” and not “CLOSE” after the engine warms up. * Clean or replace a clogged fuel filter. * Also, clean any contamination from the air cleaner. * If the issue persists, there might be a problem with the carburetor or drive system requiring professional inspection and maintenance.
What to do if my Makita Trimmer engine does not stop?
If your Makita Trimmer engine does not stop, run the engine at idling and set the choke lever to CLOSE. Check for any detached connectors and securely attach them. If the issue persists, there may be an abnormality in the electric system, requiring inspection and maintenance.
What to do if Makita ER2650LH engine stops soon after starting?
If your Makita Trimmer engine stops soon after starting or the engine speed doesn't increase, it could be due to insufficient warm-up (perform warm-up operation), the choke lever being set to “CLOSE” after warm-up (set to “OPEN”), a clogged fuel filter (clean or replace), or a contaminated or clogged air cleaner (clean it). For abnormal carburetor or drive system, request inspection and maintenance.
Why is my Makita ER2650LH vibrating so much?
If your Makita Trimmer vibrates abnormally, stop the engine immediately. Possible causes include a broken cutting attachment (replace it), a cutting attachment that is not tightened securely (tighten it securely), or one end of the nylon cutting cord being broken and the nylon cutting head becoming unbalanced (feed the nylon cutting cord by tapping the nylon cutting head on the ground). For a drive system that does not work properly, ask Makita authorized service center to inspect and repair it.
General| Power source | Gasoline |
|---|---|
| Cordless | Yes |
| Product color | Black, Cyan |
| Cutting diameter (max) | 412 mm |
Weight and Dimensions| Weight | 4800 g |
|---|
Details required protective gear and clothing for safe operation.
Procedures and precautions for safely refueling the string trimmer.
Guidance on servicing, repairs, and using genuine parts.
Procedure for checking and topping up engine oil levels.
Safe handling and storage of fuel for the trimmer.
Step-by-step guide for starting the petrol string trimmer.
Procedure for draining and refilling engine oil.
Diagnosing and resolving issues with engine starting.
Troubleshooting engine stopping or performance problems.
