To Next PageTo Next PageWhat to do if the attachment does not rotate or move on my Makita Trimmer?
If the attachment on your Makita Trimmer isn't rotating or moving, ensure that the attachment is correctly inserted to the specified point as instructed. If the issue persists, it may be due to an abnormal drive system, in which case you should request an inspection and maintenance.
What to do if my Makita EX2650LH Trimmer engine does not stop?
If the engine of your Makita Trimmer does not stop, check whether the connector is detached and attach it securely. If the issue persists, it may be due to an abnormal electric system, and you should request an inspection and maintenance.
Why does my Makita EX2650LH engine stop soon after starting?
If the Makita Trimmer's engine stops soon after starting, make sure you perform the warm-up operation adequately. Check that the choke lever is set to “OPEN” once the engine is warmed up. Also, inspect the fuel filter and clean or replace it if clogged. Ensure the air cleaner is not contaminated or clogged by cleaning it. For issues with the carburetor or drive system, it's best to request an inspection and maintenance service.
What to do if the attachment does not stop immediately on my Makita EX2650LH Trimmer?
If your Makita Trimmer's attachment does not stop immediately, try adjusting the high idling rotation. Also, check the throttle wire and attach it securely if it's detached. If the problem continues, there may be an abnormal drive system, and you should request an inspection and maintenance.
Why is my Makita EX2650LH Trimmer vibrating abnormally?
If the main unit of your Makita Trimmer vibrates abnormally, ensure the attachment is inserted to the specified point as instructed. Also, check all levers and tighten them securely if loosened. If the issue persists, it might be due to an abnormal drive system; in this case, request an inspection and maintenance.
Why does my Makita EX2650LH engine stop soon or not increase speed?
If your Makita Trimmer engine stops soon after starting or the engine speed doesn't increase, it might be due to several reasons. Ensure you perform a proper warm-up operation. Check that the choke lever is set to “OPEN” once the engine is warmed up. Clean or replace a clogged fuel filter. Also, clean a contaminated or clogged air cleaner. For issues related to the carburetor or drive system, it's recommended to request inspection and maintenance.
Why is my Makita EX2650LH main unit vibrating abnormally?
If your Makita Trimmer's main unit is vibrating abnormally, first ensure that the attachment is correctly inserted to the specified point. Also, check for any loosened levers and tighten them securely. If the issue continues, it could be related to an abnormal drive system, and you should request inspection and maintenance.
What to do if my Makita Tools engine stops soon or the speed does not increase?
If your Makita tool's engine stops shortly after starting or if the engine speed doesn't increase, it might be due to several reasons. Ensure you perform a proper warm-up operation. Check that the choke lever isn't set to “CLOSE” when the engine is warmed up; set it to “OPEN”. A clogged fuel filter can also cause this issue, so clean or replace it. Additionally, inspect the air cleaner for contamination or clogging and clean it if necessary.
What to do if the attachment of my Makita Tools does not stop immediately?
If the attachment on your Makita tool doesn't stop immediately, it could be due to high idling rotation, which requires adjustment. Another cause might be a detached throttle wire, which needs to be securely reattached.
What to do if my Makita Tools main unit vibrates abnormally?
If your Makita tool's main unit vibrates abnormally, ensure the attachment is correctly inserted. Also, check for any loosened levers and tighten them securely.
General| Engine Displacement | 25.4 cc |
|---|---|
| Engine Type | 2-Stroke |
| Fuel Type | Gasoline |
| Power Source | Gasoline |
| Shaft Type | Straight |
| Handle Type | Loop Handle |
| Power Output | 0.8 kW |
