To Next PageTo Next PageWhat to do if the attachment of my Makita Tools does not rotate or move?
If the attachment on your Makita tool doesn't rotate or move, make sure that the attachment is inserted to the specified point as instructed.
What to do if my Makita Tools engine does not stop?
If the engine of your Makita tool does not stop, check if the connector is detached and attach it securely.
Why does my Makita Lawn and Garden Equipment engine stop soon after starting?
If your Makita Lawn and Garden Equipment engine stops soon after starting or the engine speed doesn't increase, it might be due to insufficient warm-up, so perform a warm-up operation. Ensure the choke lever is set to “OPEN” after the engine is warmed up. A clogged fuel filter can cause this, so clean or replace it. Also, check the air cleaner for contamination or clogging and clean it if necessary. For carburetor or drive system issues, request an inspection and maintenance.
What to do if the attachment on my Makita Lawn and Garden Equipment does not stop immediately?
If the attachment on your Makita Lawn and Garden Equipment doesn't stop immediately, it could be due to high idling rotation, which requires adjustment. Another cause might be a detached throttle wire, so ensure it's securely attached. For abnormal drive system issues, request an inspection and maintenance.
General| Engine Displacement | 25.4 cc |
|---|---|
| Engine Type | 2-Stroke |
| Fuel Type | Gasoline |
| Power Source | Gasoline |
| Shaft Type | Straight |
| Handle Type | Loop Handle |
| Power Output | 0.8 kW |
