Makita FT Series User Manual

Makita Industry Tool Settings
for FT/FL series
JP
ユーザーマニュアル ························ 2
EN User’s Manual ····························· 26
F Mode d’emploi ···························· 50
D Gebrauchsanleitung ···················· 74
I Manuale d’uso ····························· 99
NL Gebruikershandleiding ················ 124
E Manual de Usuario ······················ 149

Makita FT Series Specifications

General

Brand	Makita
Model	FT Series
Category	Power Tool
Language	English

Summary

Introduction

About Makita Industry Tool Settings for FT/FL Series

Explains the system for setting operation settings via PC connection.

Important Notes for Using the Application

Important information to read before using the application software.

Terms of Use for the Software

Information regarding the terms of use for the software.

Installing the Makita Industry Tool App

Reference to Install Manual

Refers to the Install Manual for installation procedures.

Using the Makita Industry Tool App

Connecting the Makita Product to PC

Steps to connect the Makita product to the PC using a USB cable.

Starting the Makita Industry Tool App

Instructions on launching the Makita Industry Tool Settings application.

Overview of the Application Window

Explains the main interface elements of the application window.

Changing the Application Display Language

How to change the application's interface language from the provided list.

Setting a Password for Writing Settings

How to enable and set a password for writing product settings.

Recording Product Information (NOTE1, NOTE2)

How to record custom strings in the product information fields.

Writing Product Settings (Setting Change)

How to change product operation settings via the application.

Retrieving Settings from the Product

How to read setting information from the product using the application.

Checking Product Settings Information

Viewing product settings in visual or graph format.

Saving Setting Information to the PC

Saving the current product settings to a computer.

Retrieving Setting Information from the PC

Loading previously saved settings from the PC.

Initializing Product Setting Information

Resetting product settings to factory defaults.

Setting Maintenance Information

Configuring maintenance alarms and stop settings based on usage counts.

Removing the Makita Product Safely

Steps to safely disconnect the product after changing settings.

Supplemental Information

Using the App with Old Product Versions

Guidance for using the app with older versions of the product.