Makita GD0801C User Manual

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GD0801C GD0811C
Collet size Max. 8 mm Max. 8 mm
Max. wheel diameter 25 mm 50 mm
Max. wheel point diameter
Max. mandrel (shank) length 46 mm 46 mm
Rated speed (n) / No load speed (n
0
) 29,000 min
-1
7,000 min
-1
Overall length 390 mm 390 mm
Net weight 2.0 kg 2.0 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-8
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
󻜎 Read instruction manual.
󻜎 DOUBLE INSULATION
󻜎 Wear safety glasses.
󻜎 Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE050-1
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model GD0801C
Sound pressure level (L
pA
) : 80 dB (A)
Sound power level (L
WA
) : 91 dB (A)
Uncertainty (K) : 3 dB (A)
Model GD0811C
Sound pressure level (L
pA
) : 78 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model GD0801C
Work mode : surface grinding
Vibration emission (a
h
) : 3.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model GD0811C
Work mode : surface grinding
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.

Makita GD0801C Specifications

General

Product color	Black, Blue, Silver
Input power	750 W
Power source	AC
Collet diameter (max)	43 mm
Vibration level (grinding)	3.5 m/s²
Noise level	91 dB

Weight and Dimensions

Depth	390 mm
Width	75 mm
Height	88 mm
Weight	2000 g