Makita HM0810T Instructions

2
SPECIFICATIONS
Model HM0810T
Blows per minute ........................................................................................................................................ 2,900
Overall length .......................................................................................................................................... 428 mm
Net weight ...................................................................................................................................................5.5 kg
• Due to our continuing programme of research and development, the specifications herein are subject to
change without notice.
• Note: Specifications may differ from country to country.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN60745, EN55014, EN61000
in accordance with Council Directives, 89/336/EEC, 98/
37/EC.
Measured sound power level: 99 dB
Guaranteed sound power level: 105 dB
These sound power levels are measured in accordance
with Council Directive, 2000/14/EC.
Conformity assessment procedure: Annex VI
Notified Body: BSI Product Services, Maylands Avenue,
Hemel Hempstead, Herts HP2 4SQ, England.
Vibration
The typical weighted root mean square acceleration
value is 12 m/s
2
.
These values have been obtained according to
EN60745.
Yasuhiko Kanzaki
CE 2005
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan

Makita HM0810T Specifications

General

Cord length	5 m
Input power	900 W
Power source	AC
AC input voltage	220 V
Impact rate	2900 bpm
Sound power level	103 dB
Impact energy (max)	7.2 J
Sound pressure level	92 dB
Uncertainty coefficient (concrete)	1.5 m/s²

Weight and Dimensions

Depth	428 mm
Width	96 mm
Height	243 mm
Weight	6000 g