To Next Page

To Previous Page

P 5/ 17

Repair

[3] ASSEMBLY/ DISASSEMBLY

[3] -1. Chuck (cont.)

DISASSEMBLING

(3) Remove the components of Chuck mechanism form Tool holder as drawn in Fig. 5.

Fig. 5

2. Change ring is fixed to Change ring cover with

Retaining ring WR-45.

Remove Retaining ring WR-45 with 1R003/212.

Change ring can be removed from Change ring cover.

1. Remove Spring guide, Compression spring 56,

Change ring cover.

Chuck mechanism can be removed in this step.

Spring guide

Compression

spring 56

Change ring

cover

Retaining ring

WR-45

Change ring

Retaining ring

WR-45

Change ring

cover

ASSEMBLING

(1) Assemble Chuck mechanism by reversing the disassembly procedure. (Refer to Figs. 3, 4 and 5.)

Note for Assembling:

It is difficult to set Tool holder cap in place by hand.

Put Tool holder cap on floor, and push Tool holder to Tool holder cap while making use of the machine weight

as drawn in Fig. 6.

Fig. 6

Tool holder capTool holder

Makita HM1205C Technical Information

Other manuals for Makita HM1205C