EasyManuals Logo

Makita HM1205C User Manual

Makita HM1205C
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6 ENGLISH
The bit can be secured at 12 different angles. To
change the bit angle, slide the change ring forward,
then turn the change ring to change the bit angle. At the
desired angle, slide the change ring back to the original
position. The bit will be secured in place.
OPERATION
Chipping/Scaling/Demolition
Always use the side grip (auxiliary handle) and rmly
hold the tool by both side grip and switch handle during
operations. Turn the tool on and apply slight pressure
on the tool so that the tool will not bounce around,
uncontrolled. Pressing very hard on the tool will not
increase the efciency.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Lubrication
CAUTION:
This servicing should be performed by Makita
Authorized Service Centers only.
This tool requires no hourly or daily lubrication because
it has a grease-packed lubrication system. It should be
relubricated regularly. Send the complete tool to Makita
Authorized or Factory Service Center for this lubrication
service.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specied
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Bull point(SDS-max)
Cold chisel(SDS-max)
Scaling chisel(SDS-max)
Clay spade(SDS-max)
Bit grease
Safety goggles
Hammer grease
Plastic carrying case
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.

Other manuals for Makita HM1205C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita HM1205C and is the answer not in the manual?

Makita HM1205C Specifications

General IconGeneral
BrandMakita
ModelHM1205C
CategoryPower Hammer
LanguageEnglish

Related product manuals