P 1/ 17
Specification
Impacts per min.: min.ˉ¹ = ipm
Shank type
Variable speed control by dial
Soft start
950 - 1,900
Adapted for SDS-MAX bits
18 (11/16)
Model No.
Voltage (V)
110
120
220
230
240
15
14
7.8
7.8
7.8
50/60 1,510
---
1,510
1,510
1,510
50/60
50/60
50/60
50/60
700
700
750
750
750
1,600
1,600
1,800
1,800
1,800
Current (A)
Cycle (Hz)
Input Output
Max. Output (W)
Continuous Rating (W)
HM1205C
Yes
Yes
Yes
Double insulation
Europe: 4.0 (13.1)
Chile, Brazil: 2.0 (6.6)
Other countries: 5.0 (16.4)
9.7 (21.4)
Shank diameter: mm (")
Vibration
absorption
Electronic
control
Vibration absorbing handle
AVT (Anti-Vibration Technology using
Active dynamic vibration absorber)
Weight according to
EPTA-Procedure 01/2003*: kg (lbs)
Constant speed control
Suppression of motor speed
during no-load
Power supply cord: m (ft)
Protection from electric shock
No
No
No
* With Side handle
Note: The standard equipment for the tool
shown above may vary by country.
PRODUCT
CONCEPT AND MAIN APPLICATIONS
HM1205C
Demolition Hammer
Model HM1205C is a demolition hammer developed from model HM1203C.
Its main features are:
• Enhanced chipping sensation to soft materials
• Unrivalled high efficiency and durability as well as model HM1203C
• No changes for exterior design from model HM1203C
Models No.
Description
H
T
ECHNICAL INFORMATION
Dimensions: mm (")
Width (W)
Length (L)
576 (22-3/4)
128 (5)
265 (10-3/8)Height (H)
Standard equipment
Optional accessories
Side handle (D-shaped) ......................1
Bit grease ...........................................1
Bull-Point 18-280 ..............................1
Cleaning cloth ....................................1
Plastic carrying case ...........................1
Assorted Bull points Assorted Cold chisels
Assorted Scaling chisels Scaling chisel (for Tile)
Grooving chisel Scoop
Bushing tool Rammer
Shank (for Bushing tool and Rammer) Bit Grease
Side handle assembly (D-shaped) Hammer grease
Plastic case Syringe
Safety Goggle Hammer Service Kit
W
L
To Next Page
Need help?
General
