Makita HP333D User Manual

11 ENGLISH
Cleaning without nozzle
You can pick up powder and dust without nozzle.
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
After use
NOTICE: Putting the cleaner against the wall
without any other support cause the cleaner to
fall down and be damaged.
Cleaning
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
NOTICE: Do not blow dust sticking on the
cleaner and lters by air duster. It brings dust into
the housing and causes failure.
NOTICE: After washing lters, dry them thoroughly
before use.Insufcientlydriedltersmaycausepoor
suction and shorten the service life of the motor.
NOTICE: After cleaning lters and sponge lter,
be sure to re-install them before use. If you use the
cleanerwithoutltersandspongelter,dustcomes
into the motor housing and cause malfunction.
Cleaner body
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Cleanoutalsothesuctionopeningandltermounting
area.
Filter
Washthelterinsoapywaterwhenitiscloggedwith
dust and the cleaner power becomes weak. Dry it out
thoroughly before use.
Sponge lter
Whenthespongelterbecomesdirty,cleanitas
follows.
1. Removethelter.
2. Pulloutthespongelterfrombetweenthepillars.
3. Cleanthespongelterbytappingorwashing.If
you wash it, dry it out thoroughly before use.

Makita HP333D Specifications

General

Drilling	Yes
Chuck type	Keyless
Product design	Pistol grip drill
Number of gears	2
Torque settings	20
Idle speed (max)	1700 RPM
Idle speed (min)	450 RPM
Sound power level	93 dB
Chuck capacity (max)	10 mm
Chuck capacity (min)	0.8 mm
Sound pressure level	82 dB
Sound level uncertainty	3 dB
Drilling diameter in wood (max)	21 mm
Drilling diameter in concrete (max)	8 mm
Vibration level (concrete drilling)	13 m/s²
Vibration level uncertainty (concrete drilling)	1.5 m/s²
Power source	Battery
Battery voltage	12 V
Battery capacity	2 Ah
Product color	Black, Green
Warranty period	3 year(s)

Weight and Dimensions

Depth	193 mm
Width	66 mm
Height	212 mm
Weight	1300 g