Makita HP333D User Manual

5 ENGLISH
Indicating the remaining battery capacity
Only for battery cartridges with the indicator
1
2
►1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indicate the remain-
ing battery capacity. The indicator lamps light up for a few seconds.
Indicator lamps Remaining
capacity
Lighted Off
75% to 100%
50% to 75%
25% to 50%
0% to 25%
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Switch action
1
2
►1. ON/speed change button 2. OFF button
To start the cleaner, simply push the ON/speed change
button. To switch off, push the OFF button.
You can change the cleaner speed in three steps by
pushing the ON/speed change button.
Therstpushonthisbuttonisforhighspeedmode,the
second push for max speed mode and the third push for
normal speed mode. Each push on this button repeats
the high/max/normal speed cycle alternatively.
Lighting up the lamp
CAUTION: Do not look in the light or see the
source of light directly.
1
2
3
►1. ON/speed change button 2. OFF button 3. Lamp
To turn on the lamp, push the ON/speed change button.
Push the OFF button to turn off the lamp. During the
tool actuating, the lamp turns on.
When the remaining battery capacity gets low, the lamp
starts blinking.
NOTE: The timing, at which the lamp starts blinking,
depends on the temperature at work place and the
battery cartridge conditions.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Type of lter
Normal lter
1 2 3
►1. Capsule 2.Prelter3. Filter

Makita HP333D Specifications

General

Drilling	Yes
Chuck type	Keyless
Product design	Pistol grip drill
Number of gears	2
Torque settings	20
Idle speed (max)	1700 RPM
Idle speed (min)	450 RPM
Sound power level	93 dB
Chuck capacity (max)	10 mm
Chuck capacity (min)	0.8 mm
Sound pressure level	82 dB
Sound level uncertainty	3 dB
Drilling diameter in wood (max)	21 mm
Drilling diameter in concrete (max)	8 mm
Vibration level (concrete drilling)	13 m/s²
Vibration level uncertainty (concrete drilling)	1.5 m/s²
Power source	Battery
Battery voltage	12 V
Battery capacity	2 Ah
Product color	Black, Green
Warranty period	3 year(s)

Weight and Dimensions

Depth	193 mm
Width	66 mm
Height	212 mm
Weight	1300 g