Makita HP333D User Manual

7 ENGLISH
Disposing of dust for high
performance lter
Inordertodropduststickingonthelterinthecapsule,
tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
2
1
►1. Capsule 2. Suction inlet
NOTE: Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Remove accumulated dust from inside of capsule and
offofhighperformancelter.
1
2
►1. Capsule 2.Highperformancelter
Twisthighperformancelterindirectionofarrowtounfas-
tensecuringlipfromcleanerunitandthenpulloffthelter.
1
►1. Securing lip
Cleanoutthenedustandlightlytaptodislodgedust
fromhighperformancelter.
Reassembly
Reassembly for normal lter
Putonthelterfullyinpositiononthecleanerunit.
1
►1. Filter
NOTICE: Make sure the lter is put on straight
without being peeled back.Ifthelterisputon
incorrectly as illustrated, dust will get into the motor
housing, and cause a motor failure.
1
►1. Filter
Installtheprelter.Atthistime,makesuretotwistthe
preltersothatthesecuringlipisrmlylockedinthe
cleaner unit.
2
1
►1.Prelter2. Securing lip

Makita HP333D Specifications

General

Drilling	Yes
Chuck type	Keyless
Product design	Pistol grip drill
Number of gears	2
Torque settings	20
Idle speed (max)	1700 RPM
Idle speed (min)	450 RPM
Sound power level	93 dB
Chuck capacity (max)	10 mm
Chuck capacity (min)	0.8 mm
Sound pressure level	82 dB
Sound level uncertainty	3 dB
Drilling diameter in wood (max)	21 mm
Drilling diameter in concrete (max)	8 mm
Vibration level (concrete drilling)	13 m/s²
Vibration level uncertainty (concrete drilling)	1.5 m/s²
Power source	Battery
Battery voltage	12 V
Battery capacity	2 Ah
Product color	Black, Green
Warranty period	3 year(s)

Weight and Dimensions

Depth	193 mm
Width	66 mm
Height	212 mm
Weight	1300 g