To Next PageTo Next Page
Need help?Do you have a question about the Makita HR2510 and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Voltage | 240 V |
| No Load Speed | 0 - 1100 rpm |
| Chuck Type | SDS-Plus |
| Weight | 2.6 kg |
| Max. Drilling Diameter in Concrete | 25 mm |
| Max. Drilling Diameter in Steel | 13 mm |
| Max. Drilling Diameter in Wood | 32 mm |
Crucial safety precautions for tool operation.
Proper grip technique for stable and safe handling.
Guide to lubricating drill bits for optimal performance.
Step-by-step procedure for bit changes.
How to set the depth gauge for precise drilling.
Adjusting and utilizing the auxiliary side handle.
Mode for drilling concrete, granite, or tile.
Mode for drilling wood or metal.
How to start, stop, and control tool speed using the trigger.
Tips for effective drilling and clearing blockages.
How to install and maintain the dust collector for overhead work.
Instructions for using optional chuck for wood and metal drilling.
Procedure for replacing worn carbon brushes.
Guidance on lubricating the tool's internal mechanisms.
Typical sound pressure and power levels.
Typical weighted root mean square acceleration value.
