Need help?Do you have a question about the Makita HR4001C and is the answer not in the manual?
General| Cord length | 4 m |
|---|---|
| Input power | 1100 W |
| Output power | 1200 W |
| Power source | AC |
| Impact rate | 2750 bpm |
| Rated speed (max) | 480 RPM |
| Impact energy (max) | 6.8 J |
| Sound pressure level | 92 dB |
| Drilling diameter in concrete (max) | 40 mm |
Weight and Dimensions| Depth | 106 mm |
|---|---|
| Width | 468 mm |
| Height | 261 mm |
| Weight | 6300 g |
Crucial safety precautions to read and understand before initial use.
Technical details like model numbers, capacities, and physical measurements.
Explains the meaning of various symbols used throughout the manual.
Defines the tool's purpose and guidelines for electrical connection.
Rules for safe working environments and electrical connections to prevent hazards.
Guidelines for operator vigilance, alertness, and use of protective equipment.
Best practices for operating, maintaining, and storing the power tool safely.
Recommendations for qualified repair personnel and using genuine parts.
Explains how the trigger switch and slide switch control tool functions.
Guides on changing tool speed settings and selecting operational modes.
Instructions for hammering modes and understanding the torque limiter's behavior.
Information on status lights and how to attach auxiliary handles for safe operation.
Using the depth gauge and performing hammer drilling safely.
Instructions for operating the tool in chipping and demolition modes.
Guidance on lubricating the tool, including specific timing and methods.
To Next Page
