Need help?Do you have a question about the Makita HR4011C and is the answer not in the manual?
General| Input power | 1100 W |
|---|---|
| Power source | AC |
| Impact rate | 2750 bpm |
| Rated speed (max) | 480 RPM |
| Impact energy (max) | 6.2 J |
| Drilling diameter in wood (max) | 105 mm |
| Drilling diameter in concrete (max) | 40 mm |
| Weight (including battery) | 5900 g |
Weight and Dimensions| Depth | 116 mm |
|---|---|
| Width | 468 mm |
| Height | 261 mm |
Explains the meaning of various symbols used on the tool and manual.
Describes the tool's purpose for hammer drilling and chiselling.
Details the voltage and AC supply requirements for tool operation.
Presents A-weighted noise levels and acceleration values for HR4001C.
Presents A-weighted noise levels and acceleration values for HR4010C.
Presents A-weighted noise levels and acceleration values for HR4011C.
Guidelines for maintaining a clean, well-lit, and safe working environment.
Precautions to prevent electric shock and hazards.
Advice on staying alert, using safety equipment, and avoiding accidents.
Covers forcing the tool, switch functionality, and disconnection before adjustments.
Advice on checking for damage, keeping tools sharp, and proper repair.
Details on avoiding misuse, proper storage, and handling of power tools.
Describes the function of the power-ON and service indicator lamps.
Instructions and cautions for performing assembly tasks on the tool.
Details on attaching and adjusting the side handle for safe operation.
Instructions for using and adjusting the side grip for enhanced control.
How to set the tool for drilling in concrete, masonry, and stone.
Instructions for setting the tool for chipping, scaling, or demolition.
Specific note for prolonged hammering operations on certain models.
Explanation of the torque limiter function and its operation.
Step-by-step guide for performing hammer drilling with the tool.
Instructions for using the blow-out bulb to clean drilled holes.
Guidance on holding and operating the tool for chipping tasks.
Information on tool lubrication and when it should be performed.
To Next Page
