Need help?Do you have a question about the Makita HR4003C and is the answer not in the manual?
General| Type | Hammer drill |
|---|---|
| Product color | Black, Green |
| Idle speed (max) | 500 RPM |
| Idle speed (1st gear) | 250 RPM |
| Impact rate (low speed) | 1450 bpm |
| Impact rate (high speed) | 2900 bpm |
| Drilling diameter in wood (max) | - mm |
| Drilling diameter in concrete (max) | 40 mm |
| Chuck type | SDS Max |
| Product design | Pistol grip drill |
| Hammer drilling | Yes |
| Input power | 1100 W |
| Cable length | 5 m |
| Power source | AC |
Weight and Dimensions| Depth | 106 mm |
|---|---|
| Width | 479 mm |
| Height | 263 mm |
| Weight | 6200 g |
Guidelines for maintaining a safe working environment to prevent accidents.
Precautions to prevent electric shock hazards during tool operation.
Protective measures against noise and ensuring control with auxiliary handles.
Safety tips for handling, operation, and avoiding hazards during use.
Procedures and safety precautions for drilling in concrete or masonry.
Guidance on performing chipping and demolition tasks with the tool.
To Next Page
