20
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
• Steel & Carbide-tipped saw blades
• Vise assembly (Horizontal vise)
• Vertical vise
• Socket wrench 13
• Holder set
• Holder assembly
• Holder rod assembly
• Set plate
• Dust bag
• Crown molding stopper set
• Triangular rule
• Lock-off button (2 pcs.)
Miter saw blades For smooth and precise cutting in various
materials.
Combination General purpose blade for fast and smooth rip,
crosscuts and miters.
Crosscutting For smoother cross grain cuts. Slices cleanly
against the grain.
Fine cross cuts For sand-free cuts cleanly against the grain.
Non-ferrous met-
als miter saw
blades
For miters in aluminum, copper, brass, tubing,
and other non-ferrous metals.
To Next Page
Loading...
