Why my Makita LXT XRU16PT Trimmer motor does not run?
If the Makita Trimmer motor isn't running, first, ensure the battery cartridge is correctly installed. If it still doesn't work, the battery might be the issue. Try recharging it, and if that doesn't help, replace the battery cartridge. If problems persist, the drive system may not be working correctly, and you should seek repair at your local authorized service center.
What to do if Makita Trimmer has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be due to a broken, bent, or worn cutting tool, which requires replacement. It could also be that the cutting tool is loosely attached, so tighten it securely. If neither of these solutions works, the drive system may not be functioning correctly, and you should seek assistance from your local authorized service center.
What to do if Makita LXT XRU16PT cutting tool does not rotate?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! Check if a foreign object, like a branch, is jammed between the guard and the cutting tool and remove it. Also, verify that the cutting tool is securely tightened. If the problem persists, the drive system may not be working correctly, and you should contact your local authorized service center for repair.
What to do if Makita LXT XRU16PT Trimmer cutting tool and motor cannot stop?
If the cutting tool and motor on your Makita Trimmer cannot be stopped, remove the battery immediately! This likely indicates an electric or electronic malfunction. Remove the battery cartridge and seek assistance from your local authorized service center for repair.
What to do if Makita LXT XRU16PT Trimmer motor stops running after a little use?
If your Makita Trimmer motor stops running shortly after you start using it, it could be due to a low battery. Try recharging the battery cartridge, and if that doesn't solve the issue, replace the battery. Alternatively, the tool might be overheating. If this is the case, stop using the trimmer and allow it to cool down.
Why my Makita LXT XRU16PT Trimmer does not reach maximum RPM?
General| Type | String Trimmer |
|---|---|
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Variable Speed | Yes |
| Bump Feed | Yes |
| Shaft Type | Straight |
| Cutting Width | 15 inches |
| Features | Automatic Torque Drive Technology, Brushless Motor |
| Line Diameter | 0.080" |
Details on compatible battery cartridges, adapters, and chargers for the tool.
Essential safety precautions for using gardening appliances.
General guidelines for safe and proper operation of the tool.
Ensures tool is used for its designed purpose, e.g., cutting grass.
Emphasizes using only approved accessories to prevent injury.
Guidance on appropriate clothing and footwear for safe operation.
Step-by-step guide for operating the tool safely and effectively.
Instructions and techniques to prevent dangerous kickback incidents.
Essential steps for maintaining the tool in good working condition.
Crucial safety guidelines for handling, storing, and disposing of battery cartridges.
Advice on charging and handling batteries for optimal performance and lifespan.
Step-by-step guide for inserting and removing the battery pack.
Explanation of systems protecting tool/battery from overload or overheat.
How to check the current charge level of the battery cartridge.
Details on using the lock-off lever and switch trigger safely.
Instructions on how to change the tool's speed settings.
How to activate and utilize the Automatic Torque Drive Technology.
Guide on using the reverse function to clear entangled debris.
Information about the tool's electric brake system and its function.
Explanation of the constant speed control feature.
Details on the soft start feature for reduced starting shock.
Instructions for attaching and securing the handle to the tool body.
Steps to attach the safety barrier on loop handle models.
Warning regarding the correct installation of the protector for safety.
Detailed instructions for installing cutter blades and nylon cutting heads.
Safety precautions and handling tips for cutter blades.
Instructions for using and maintaining the nylon cutting head.
Steps for correctly attaching and adjusting the shoulder harness.
Guide for adjusting the hanger position for comfortable handling on XRU16.
Key principles for safe operation, including positioning and distance.
Instructions for cleaning the grass trimmer after use.
Detailed steps for replacing the nylon cutting line.
To Next Page
