What to do if Makita DUR369LZ Trimmer motor stops running after a little use?
If your Makita Trimmer motor stops running shortly after you start using it, it could be due to a low battery. Try recharging the battery cartridge, and if that doesn't solve the issue, replace the battery. Alternatively, the tool might be overheating. If this is the case, stop using the trimmer and allow it to cool down.
What to do if Makita DUR369LZ cutting tool does not rotate?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! Check if a foreign object, like a branch, is jammed between the guard and the cutting tool and remove it. Also, verify that the cutting tool is securely tightened. If the problem persists, the drive system may not be working correctly, and you should contact your local authorized service center for repair.
Why my Makita DUR369LZ Trimmer motor does not run?
If the Makita Trimmer motor isn't running, first, ensure the battery cartridge is correctly installed. If it still doesn't work, the battery might be the issue. Try recharging it, and if that doesn't help, replace the battery cartridge. If problems persist, the drive system may not be working correctly, and you should seek repair at your local authorized service center.
Why my Makita DUR369LZ does not reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, start by checking if the battery cartridge is properly installed as described in the manual. If it is, the battery power might be dropping. Try recharging the battery cartridge, and if that doesn't work, replace it. If the issue continues, the drive system may not be functioning correctly, and you should consult your local authorized service center for repair.
What to do if Makita Trimmer has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be due to a broken, bent, or worn cutting tool, which requires replacement. It could also be that the cutting tool is loosely attached, so tighten it securely. If neither of these solutions works, the drive system may not be functioning correctly, and you should seek assistance from your local authorized service center.
What to do if Makita DUR369LZ cutting tool and motor cannot stop?
If the cutting tool and motor on your Makita Trimmer cannot be stopped, remove the battery immediately! This likely indicates an electric or electronic malfunction. Remove the battery cartridge and seek assistance from your local authorized service center for repair.
General| Type | 2-in-1 Brush cutter & String trimmer |
|---|---|
| Cordless | Yes |
| Head type | Blade & nylon line |
| Handle type | D-loop handle |
| Product color | Green |
| Rotational speed | 7000 RPM |
| Cutting diameter (max) | 430 mm |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery included | No |
Weight and Dimensions| Length | 1905 mm |
|---|---|
| Weight | 5700 g |
Details on model variants, performance, dimensions, weight and voltage.
Lists compatible battery cartridges, adapters, and chargers for the tool.
Details sound pressure and power levels for various cutting tools on DUR369A/L models.
Specifies vibration levels for left and right hands with different cutting tools.
Explains the meaning of various symbols used in the manual for user understanding.
Provides essential safety warnings applicable to all power tools, covering work area, electrical, and personal safety.
Advises on maintaining tools, caring for battery packs, and proper usage.
Clarifies the tool's purpose and specifies necessary protective gear.
Outlines steps before assembly/adjustment, including safety checks.
Provides instructions on operating the tool, handling emergencies, and proper grip.
Explains kickback avoidance and details routine maintenance tasks.
Covers tool storage, first aid measures, and critical battery handling safety instructions.
Illustrates and lists all components of the DUR369A and DUR369L models.
Guides on battery installation and explains the tool/battery protection system.
Explains switch operation, including the lock-off lever for safety.
Describes speed adjustment and the Automatic Torque Drive Technology feature.
Covers electric brake, speed/start features, and tool assembly instructions.
Instructions on barriers, wrench storage, and correct protector combinations.
Guides on installing cutting tools and their respective protectors.
Step-by-step guides for bump & feed and manual feed nylon cutting heads.
Instructions for plastic blade installation and shoulder harness attachment.
Explains shoulder harness adjustment and hanger position changes for comfort.
Provides guidance on tool positioning, handling, and bump feed nylon head operation.
Details tool cleaning, maintenance precautions, and nylon cord replacement.
Illustrates the procedure for replacing the nylon cord on the 95-M10L cutting head.
Illustrates the procedure for replacing the nylon cord on the B&F ECO 4L cutting head.
Illustrates the procedure for replacing the nylon cord on UN-74L/UN-72L cutting heads.
Details manual feed cord steps and plastic blade replacement procedure.
Lists common problems, remedies, and recommended optional accessories.
To Next Page
