EasyManua.ls Logo

Makita DUR369A - User Manual

Makita DUR369A
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
Cordless Grass Trimmer
DUR369A
DUR369L
ENGLISH: Original instructions
Read before use.

Table of Contents

Questions and Answers

  • S
    Samantha Ramirez MDJul 28, 2025
    What to do if Makita DUR369A cutting tool does not rotate?
    • K
      Karen AlexanderJul 28, 2025
      If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! Check if a foreign object, like a branch, is jammed between the guard and the cutting tool and remove it. Also, verify that the cutting tool is securely tightened. If the problem persists, the drive system may not be working correctly, and you should contact your local authorized service center for repair.
  • J
    James GomezAug 1, 2025
    What to do if Makita Trimmer cutting tool and motor cannot stop?
    • B
      Bradley BaldwinAug 1, 2025
      If the cutting tool and motor on your Makita Trimmer cannot be stopped, remove the battery immediately! This likely indicates an electric or electronic malfunction. Remove the battery cartridge and seek assistance from your local authorized service center for repair.
  • R
    Richard McdanielAug 6, 2025
    Why my Makita Trimmer motor does not run?
    • D
      dbakerAug 6, 2025
      If the Makita Trimmer motor isn't running, first, ensure the battery cartridge is correctly installed. If it still doesn't work, the battery might be the issue. Try recharging it, and if that doesn't help, replace the battery cartridge. If problems persist, the drive system may not be working correctly, and you should seek repair at your local authorized service center.
  • M
    Maria GloverAug 12, 2025
    What to do if Makita DUR369A motor stops running after a little use?
    • J
      Jennifer WilliamsAug 12, 2025
      If your Makita Trimmer motor stops running shortly after you start using it, it could be due to a low battery. Try recharging the battery cartridge, and if that doesn't solve the issue, replace the battery. Alternatively, the tool might be overheating. If this is the case, stop using the trimmer and allow it to cool down.
  • T
    tracymathisAug 16, 2025
    Why my Makita Trimmer does not reach maximum RPM?
    • T
      Tiffany DiazAug 16, 2025
      If your Makita Trimmer isn't reaching its maximum RPM, start by checking if the battery cartridge is properly installed as described in the manual. If it is, the battery power might be dropping. Try recharging the battery cartridge, and if that doesn't work, replace it. If the issue continues, the drive system may not be functioning correctly, and you should consult your local authorized service center for repair.
  • E
    erica41Aug 22, 2025
    What to do if Makita Trimmer has abnormal vibration?
    • T
      Timothy HallAug 22, 2025
      If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be due to a broken, bent, or worn cutting tool, which requires replacement. It could also be that the cutting tool is loosely attached, so tighten it securely. If neither of these solutions works, the drive system may not be functioning correctly, and you should seek assistance from your local authorized service center.

Summary

Safety Warnings

General Safety Instructions

Covers work area, electrical, and general power tool safety precautions.

Personal and Battery Safety

Focuses on operator safety, PPE, and battery handling guidelines.

Tool Specific Safety

Operation and Setup

Putting into Operation

Step-by-step guide to prepare the tool before use.

Tool Operation

Guidance on how to use the tool safely and effectively.

Cutting Tools and Kickback

Storage, First Aid, and Battery Safety

Component Identification and Functions

Functional Descriptions

Power Switch and Controls

Assembly and Installation

Handle and Barrier Installation

Steps for attaching the handle and barrier to the tool.

Cutting Tool Installation

Procedures for mounting cutter blades, nylon heads, and plastic blades.

Tool Handling and Maintenance

Correct Tool Handling

Maintenance: Cleaning and Cord Replacement

Nylon Cord Replacement Guides

Plastic Blade Replacement

Troubleshooting and Accessories

Troubleshooting Common Issues

Makita DUR369A Specifications

General IconGeneral
BrandMakita
ModelDUR369A
CategoryTrimmer
LanguageEnglish

Related product manuals