EasyManua.ls Logo

Makita DUR369L - User Manual

Makita DUR369L
128 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DUR369A
DUR369L
EN
Cordless Grass Trimmer INSTRUCTION MANUAL 13
PL
Akumulatorowa wykaszarka
do trawy
INSTRUKCJA OBSŁUGI 26
HU
Vezeték nélküli fűkasza HASZNÁLATI KÉZIKÖNYV 41
SK
Akumulátorová kosačka NÁVOD NA OBSLUHU 55
CS
Akumulátorový vyžínač NÁVOD K OBSLUZE 69
UK
Акумуляторна
газонокосарка
ІНСТРУКЦІЯ З
ЕКСПЛУАТАЦІЇ
82
RO
Motocositoare pentru iarbă
fără cablu
MANUAL DE INSTRUCŢIUNI 98
DE
Akku-Rasentrimmer BETRIEBSANLEITUNG 112

Table of Contents

Questions and Answers

  • C
    Cameron GarciaJul 29, 2025
    What to do if Makita Trimmer cutting tool does not rotate?
    • J
      Jennifer GibsonJul 29, 2025
      If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! Check if a foreign object, like a branch, is jammed between the guard and the cutting tool and remove it. Also, verify that the cutting tool is securely tightened. If the problem persists, the drive system may not be working correctly, and you should contact your local authorized service center for repair.
  • M
    Mark HallAug 2, 2025
    Why my Makita Trimmer motor does not run?
    • B
      Barry McdanielAug 2, 2025
      If the Makita Trimmer motor isn't running, first, ensure the battery cartridge is correctly installed. If it still doesn't work, the battery might be the issue. Try recharging it, and if that doesn't help, replace the battery cartridge. If problems persist, the drive system may not be working correctly, and you should seek repair at your local authorized service center.
  • D
    Derek GillespieAug 7, 2025
    What to do if Makita DUR369L motor stops running after a little use?
    • N
      Nicole WilliamsAug 7, 2025
      If your Makita Trimmer motor stops running shortly after you start using it, it could be due to a low battery. Try recharging the battery cartridge, and if that doesn't solve the issue, replace the battery. Alternatively, the tool might be overheating. If this is the case, stop using the trimmer and allow it to cool down.
  • A
    Andrea McleanAug 13, 2025
    Why my Makita DUR369L does not reach maximum RPM?
    • C
      cummingsterryAug 13, 2025
      If your Makita Trimmer isn't reaching its maximum RPM, start by checking if the battery cartridge is properly installed as described in the manual. If it is, the battery power might be dropping. Try recharging the battery cartridge, and if that doesn't work, replace it. If the issue continues, the drive system may not be functioning correctly, and you should consult your local authorized service center for repair.
  • J
    Juan TranAug 17, 2025
    What to do if Makita DUR369L Trimmer has abnormal vibration?
    • C
      chawkinsAug 17, 2025
      If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be due to a broken, bent, or worn cutting tool, which requires replacement. It could also be that the cutting tool is loosely attached, so tighten it securely. If neither of these solutions works, the drive system may not be functioning correctly, and you should seek assistance from your local authorized service center.
  • T
    Teresa OsborneAug 22, 2025
    What to do if Makita DUR369L cutting tool and motor cannot stop?
    • D
      Daniel HammondAug 22, 2025
      If the cutting tool and motor on your Makita Trimmer cannot be stopped, remove the battery immediately! This likely indicates an electric or electronic malfunction. Remove the battery cartridge and seek assistance from your local authorized service center for repair.

Summary

Specifications

Applicable battery cartridge, battery adapter and charger

Details compatible batteries, adapters, and chargers for the tool.

Noise

Sound pressure and power levels for different cutting tools.

Vibration

Important safety instructions for the tool

Intended use

Specifies the tool's purpose and limitations to prevent injury.

Personal protective equipment

Recommended safety gear for operating the tool.

Work area safety

Electrical and battery safety

Putting into operation

Operation

Important safety instructions for battery cartridge

Tips for maintaining maximum battery life

FUNCTIONAL DESCRIPTION

Installing or removing battery cartridge

Step-by-step guide for inserting and removing the battery.

Tool; battery protection system

Explanation of overload, overheat, and overdischarge protections.

Indicating the remaining battery capacity

Automatic Torque Drive Technology

ASSEMBLY

Installing the handle

Correct combination of the cutting tool and the protector

Installing the protector

Installing the cutting tool

Cutter blade

Nylon cutting head

Plastic blade

Attaching the shoulder harness

Correct handling of the tool

Replacing the nylon cord

TROUBLESHOOTING

Makita DUR369L Specifications

General IconGeneral
Power SourceBattery
Battery Voltage36V
Motor TypeBrushless
Line Diameter2.0 mm
TypeGrass trimmer
Spindle SizeM10 x 1.25

Related product manuals