Why Makita DUR368L Trimmer does not reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, check if the battery is installed properly according to the manual. Also, the battery power might be dropping, so try recharging or replacing the battery. If the issue persists, the drive system may not be functioning correctly.
What to do if cutting tool does not rotate on Makita DUR368L Trimmer?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! A foreign object, like a branch, may be jammed between the guard and the cutting tool. If so, remove the foreign object.
What to do if my Makita DUR368L Trimmer motor does not run?
If the motor of your Makita Trimmer doesn't start, possible causes include: the battery cartridge might not be installed—ensure it is properly installed. The battery may be under voltage—try recharging it, and if that doesn't work, replace the battery. If these steps don't resolve the issue, the drive system may not be working correctly.
Why does my Makita Trimmer motor stop running after a little use?
If your Makita Trimmer motor stops shortly after starting, it could be due to a low battery charge—recharge the battery, and replace it if recharging isn't effective. Another cause might be overheating—stop using the tool and allow it to cool down.
What to do if cutting tool and motor cannot stop on Makita DUR368L Trimmer?
If the cutting tool and motor of your Makita Trimmer won't stop, immediately remove the battery. This issue may indicate an electric or electronic malfunction.
What to do if Makita DUR368L has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be because one end of the nylon cord has broken. To fix this, tap the nylon cutting head against the ground while it is rotating to feed the cord.
Covers fundamental safety rules for operating power tools.
User safety measures including alertness and protective equipment.
Environmental safety rules to prevent accidents in the workspace.
Precautions to prevent electric shock and hazards.
Proper usage and maintenance tips for the power tool.
Essential safety gear for operating the tool.
Guidelines for safe use and maintenance of battery-powered tools.
Specific safety precautions for electrical and battery components.
Safety measures related to the operating environment and bystanders.
Critical safety instructions to prevent injury and damage.
Detailed steps and precautions for safe tool operation.
Explanation of kickback phenomenon and prevention.
Methods to prevent kickback during operation.
Tips and procedures for optimal battery performance and longevity.
Critical warnings and checks before assembling the tool.
Proper tool handling to maximize control and minimize kickback.
Common problems, their causes, and remedies.
General| Power Source | Battery |
|---|---|
| Battery Type | Lithium-Ion |
| Cutting Width | 350 mm |
| No Load Speed | 3, 500 - 6, 500 RPM |
| Spindle Size | M10 x 1.25 LH |
| Voltage | 36V (18V x2) |
| Weight | 4.5 kg |
To Next Page
