What to do if my Makita DUR368LZ Trimmer motor does not run?
If the motor of your Makita Trimmer doesn't start, possible causes include: the battery cartridge might not be installed—ensure it is properly installed. The battery may be under voltage—try recharging it, and if that doesn't work, replace the battery. If these steps don't resolve the issue, the drive system may not be working correctly.
Why does my Makita Trimmer motor stop running after a little use?
If your Makita Trimmer motor stops shortly after starting, it could be due to a low battery charge—recharge the battery, and replace it if recharging isn't effective. Another cause might be overheating—stop using the tool and allow it to cool down.
What to do if cutting tool and motor cannot stop on Makita DUR368LZ?
If the cutting tool and motor of your Makita Trimmer won't stop, immediately remove the battery. This issue may indicate an electric or electronic malfunction.
Why Makita DUR368LZ Trimmer does not reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, check if the battery is installed properly according to the manual. Also, the battery power might be dropping, so try recharging or replacing the battery. If the issue persists, the drive system may not be functioning correctly.
What to do if cutting tool does not rotate on Makita DUR368LZ?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! A foreign object, like a branch, may be jammed between the guard and the cutting tool. If so, remove the foreign object.
What to do if Makita DUR368LZ Trimmer has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be because one end of the nylon cord has broken. To fix this, tap the nylon cutting head against the ground while it is rotating to feed the cord.
Details sound pressure and sound power levels for different cutting tools.
Covers intended use, general instructions, PPE, work area safety, and power tool warnings.
Crucial guidance on positioning, control, and safety during tool operation.
General| Power source | Battery |
|---|---|
| Type | Brush cutter |
| Cordless | Yes |
| Head type | Nylon line |
| Handle type | - |
| Product color | Black, Blue |
| Rotational speed | 6500 RPM |
| Cutting diameter (max) | 350 mm |
Weight and Dimensions| Depth | 231 mm |
|---|---|
| Width | 362 mm |
| Length | 1758 mm |
To Next Page
