Why Makita Trimmer does not reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, check if the battery is installed properly according to the manual. Also, the battery power might be dropping, so try recharging or replacing the battery. If the issue persists, the drive system may not be functioning correctly.
What to do if cutting tool does not rotate on Makita DUR368A Trimmer?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! A foreign object, like a branch, may be jammed between the guard and the cutting tool. If so, remove the foreign object.
What to do if my Makita Trimmer motor does not run?
If the motor of your Makita Trimmer doesn't start, possible causes include: the battery cartridge might not be installed—ensure it is properly installed. The battery may be under voltage—try recharging it, and if that doesn't work, replace the battery. If these steps don't resolve the issue, the drive system may not be working correctly.
Why does my Makita DUR368A Trimmer motor stop running after a little use?
If your Makita Trimmer motor stops shortly after starting, it could be due to a low battery charge—recharge the battery, and replace it if recharging isn't effective. Another cause might be overheating—stop using the tool and allow it to cool down.
What to do if cutting tool and motor cannot stop on Makita Trimmer?
If the cutting tool and motor of your Makita Trimmer won't stop, immediately remove the battery. This issue may indicate an electric or electronic malfunction.
What to do if Makita DUR368A has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be because one end of the nylon cord has broken. To fix this, tap the nylon cutting head against the ground while it is rotating to feed the cord.
Covers essential safety rules applicable to all power tools for safe operation.
Guidelines for operator safety, including alertness, protective equipment, and preventing unintentional starting.
Recommends wearing safety helmet, goggles, gloves, and appropriate clothing for protection.
Safety precautions related to electrical connections and battery usage.
Steps and precautions before starting the tool for the first time.
Steps for safe operation, including starting, stopping, and general handling of the tool.
Guidance on selecting cutting tools and understanding kickback prevention.
Procedures for maintaining the tool, including cleaning, checks, and proper storage.
Crucial warnings and guidelines for handling Makita batteries safely to prevent injury or fire.
Correct procedures for inserting and removing the battery cartridge from the tool.
Explanation and operation of ADT for optimal performance in different cutting conditions.
Guidelines for positioning and handling the tool correctly to ensure control and safety.
Diagnosing and resolving problems like motor not running, overheating, or cutting tool not rotating.
General| Motor Type | Brushless |
|---|---|
| Power Source | Battery |
| Battery Voltage | 36V |
| Battery Type | Lithium-ion |
| Handle Type | Loop Handle |
| Voltage | 36V |
| No Load Speed (RPM) | 6000 RPM |
| Spindle Size | M10 x 1.25 |
To Next Page
