EasyManua.ls Logo

Makita DUR369N - User Manual

Makita DUR369N
124 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DUR369N
EN
Cordless Grass Trimmer INSTRUCTION MANUAL 9
FR
Coupe Herbe Sans Fil MANUEL D’INSTRUCTIONS 19
DE
Akku-Rasentrimmer BETRIEBSANLEITUNG 31
IT
Tagliabordi a batteria ISTRUZIONI PER L’USO 43
NL
Accugrastrimmer GEBRUIKSAANWIJZING 55
ES
Cortador Inalámbrico de
Pasto
MANUAL DE
INSTRUCCIONES
67
PT
TESOURA PARA GRAMA A
BATERIA
MANUAL DE INSTRUÇÕES 79
DA
Akku græstrimmer BRUGSANVISNING 91
EL
  102
TR
 KULLANMA KILAVUZU 114

Table of Contents

Questions and Answers

  • J
    Johnny RussoAug 3, 2025
    Why my Makita DUR369N does not reach maximum RPM?
    • M
      Melinda GregoryAug 3, 2025
      If your Makita Trimmer isn't reaching its maximum RPM, start by checking if the battery cartridge is properly installed as described in the manual. If it is, the battery power might be dropping. Try recharging the battery cartridge, and if that doesn't work, replace it. If the issue continues, the drive system may not be functioning correctly, and you should consult your local authorized service center for repair.
  • E
    Elizabeth ComptonAug 8, 2025
    What to do if Makita DUR369N Trimmer cutting tool does not rotate?
    • N
      Nicole McguireAug 8, 2025
      If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! Check if a foreign object, like a branch, is jammed between the guard and the cutting tool and remove it. Also, verify that the cutting tool is securely tightened. If the problem persists, the drive system may not be working correctly, and you should contact your local authorized service center for repair.
  • L
    Leslie ArroyoAug 13, 2025
    Why my Makita DUR369N Trimmer motor does not run?
    • S
      Susan BergAug 13, 2025
      If the Makita Trimmer motor isn't running, first, ensure the battery cartridge is correctly installed. If it still doesn't work, the battery might be the issue. Try recharging it, and if that doesn't help, replace the battery cartridge. If problems persist, the drive system may not be working correctly, and you should seek repair at your local authorized service center.
  • C
    Charles GomezAug 18, 2025
    What to do if Makita DUR369N motor stops running after a little use?
    • N
      nicholasparrishAug 18, 2025
      If your Makita Trimmer motor stops running shortly after you start using it, it could be due to a low battery. Try recharging the battery cartridge, and if that doesn't solve the issue, replace the battery. Alternatively, the tool might be overheating. If this is the case, stop using the trimmer and allow it to cool down.
  • B
    brian93Aug 23, 2025
    What to do if Makita DUR369N Trimmer has abnormal vibration?
    • M
      Megan FerrellAug 23, 2025
      If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be due to a broken, bent, or worn cutting tool, which requires replacement. It could also be that the cutting tool is loosely attached, so tighten it securely. If neither of these solutions works, the drive system may not be functioning correctly, and you should seek assistance from your local authorized service center.
  • A
    Amanda ClayAug 28, 2025
    What to do if Makita DUR369N Trimmer cutting tool and motor cannot stop?
    • P
      Patrick DiazAug 29, 2025
      If the cutting tool and motor on your Makita Trimmer cannot be stopped, remove the battery immediately! This likely indicates an electric or electronic malfunction. Remove the battery cartridge and seek assistance from your local authorized service center for repair.

Summary

SAFETY WARNINGS

General power tool safety warnings

Core safety guidelines for all power tools.

Important safety instructions for the tool

Crucial safety advice specific to this power tool.

Personal protective equipment

Work area safety

Electrical and battery safety

Putting into operation

Operation

Vibration

First aid

Important safety instructions for battery cartridge

Tips for maintaining maximum battery life

FUNCTIONAL DESCRIPTION

Tool; battery protection system

Overload protection

How overload protection functions and is indicated by the caution lamp.

Overheat protection for tool or battery

How overheating protection works and its indicators.

Overdischarge protection

How overdischarge protection operates and its indicators.

Indicating the remaining battery capacity

Main power switch

Switch action

Speed adjusting

Automatic Torque Drive Technology

Reverse button for debris removal

Electric brake

Electronic function

ASSEMBLY

Installing the protector

Installing the cutting tool

Replacing the plastic blade

OPERATION

Plastic blade replacement

TROUBLESHOOTING

Makita DUR369N Specifications

General IconGeneral
Power SourceBattery
Battery Voltage36V
Motor TypeBrushless
No Load Speed (Hi)6, 500 rpm
No Load Speed (Lo)4500 rpm
Blade TypeNylon line
Line Diameter2.4 mm

Related product manuals