Need help?Do you have a question about the Makita M8700 and is the answer not in the manual?
General| Chuck Type | SDS-Plus |
|---|---|
| Impact Energy | 2.3 J |
| Power Input | 710 W |
| Max. Drilling Diameter in Concrete | 22 mm |
| Max. Drilling Diameter in Steel | 13 mm |
| Max. Drilling Diameter in Wood | 32 mm |
| No Load Speed | 0 - 1100 rpm |
Proper handling of power cords, plugs, and avoiding wet conditions.
Staying alert, using PPE, and preventing accidental starts.
Firm grip, proper footing, and keeping hands away from moving parts.
Awareness of hot parts, material hazards, and avoiding pointing the tool at others.
Understanding the torque limiter and immediate shutdown action.
Steps for performing hammer drilling, including trigger control.
To Next Page
