Need help?Do you have a question about the Makita HR5202C and is the answer not in the manual?
General| Reverse | - |
|---|---|
| Drilling | No |
| Chuck type | SDS Max |
| Product color | Black, Blue |
| Hammer drilling | Yes |
| Cord length | 5 m |
| Input power | 1510 W |
| Power source | AC |
| Idle speed (max) | 310 RPM |
| Impact rate (max) | 2250 IPM |
| Impact rate (min) | 110 IPM |
| Impact energy (max) | 20 J |
| Sound pressure level | 99 dB |
| Vibration level (hammer drilling) | 17 m/s² |
| Drilling diameter in concrete (max) | 52 mm |
Weight and Dimensions| Width | 599 mm |
|---|---|
| Weight | 10900 g |
Guidelines for safe work areas, including lighting, atmosphere, and electrical precautions like plug safety and water avoidance.
Emphasizes alertness, common sense, protective equipment, and preventing unintentional starts.
Instructions on using the tool correctly, maintaining it, and storing it safely to prevent accidents.
Guidance on servicing, lubricating, keeping handles clean, and specific warnings for rotary hammers like noise protection.
Describes holding the tool by insulated surfaces, wearing PPE, checking screws, and warming up the tool.
Guides the user on how to select between hammer drilling and hammering/chipping modes using the change lever.
Instructions on attaching and positioning the side handle and side grip for safe operation.
To Next Page
