Need help?Do you have a question about the Makita HR5211C and is the answer not in the manual?
General| Input power | 1500 W |
|---|---|
| Power source | AC |
| Impact rate | 2150 bpm |
| Rated speed (max) | 260 RPM |
| Impact energy (max) | 18.9 J |
| Drilling diameter in concrete (max) | 52 mm |
| Weight (including battery) | 11600 g |
Instructions to read the manual for symbol understanding.
Indicates double insulation for safety.
Guidelines for maintaining a safe work environment and preventing accidents.
Precautions for safe use of electrical power tools and connections.
Recommendations for operator safety and awareness during use.
Guidelines for proper operation, maintenance, and storage of power tools.
Protect hearing from potential damage caused by noise exposure.
Ensure proper control and prevent injury by using auxiliary handles.
Hold tool by insulated surfaces to prevent shock from live wires.
Wear safety helmet, glasses, face shield, dust mask, and gloves.
Ensure the bit is securely fastened before starting operation.
Verify screw tightness to prevent breakdown or accidents.
Warm up tool in cold weather or after long periods of inactivity.
Details on how to operate the switch trigger for starting and stopping.
Information on using the slide switch for specific modes.
Setting the tool for rotation and hammering.
Setting the tool for hammering only operations.
Instructions for attaching and adjusting the side handle.
Information on applying bit grease for smooth operation.
Steps for performing hammer drilling operations.
Instructions for chipping, scaling, and demolition tasks.
Guidance on tool lubrication and servicing intervals.
To Next Page
