Need help?Do you have a question about the Makita HR5201C and is the answer not in the manual?
General| Type | Rotary Hammer |
|---|---|
| Input Power | 1500 W |
| Chuck Type | SDS-Max |
| Max. Drilling Capacity (Concrete) | 52 mm |
| Power Source | Corded |
Lists drill bit capacities, no-load speed, and blows per minute for each model.
Explains key symbols used in the manual for safe operation and product identification.
Defines the tool's purpose for hammer drilling and chiseling in masonry and stone.
Details electrical connection requirements, voltage, and double insulation features.
Provides noise and vibration emission levels for model HR5201C according to EN60745.
Guidelines for maintaining a safe work environment, including lighting and avoiding hazardous atmospheres.
Emphasizes staying alert, using PPE, and preventing unintentional starts for safe operation.
Covers guidelines for operating, maintaining, and storing power tools safely.
Advises on professional servicing and using only identical replacement parts for safety.
Lists essential safety measures specific to operating rotary hammers.
Explains the tool's functions and components like the switch trigger and slide switch.
Describes how to set the tool for rotation and hammering action using the change lever.
Explains how to set the tool for hammering-only operations like chipping or demolition.
Details setting the tool for chipping, scaling, and demolition operations.
Details how to use the adjusting dial to control revolutions and blows per minute.
Instructions on attaching and adjusting the side handle for safe operation.
Guides on performing hammer drilling, including pressure and hole clearing.
Instructions for operating the tool in chipping, scaling, and demolition modes.
Details lubrication requirements, noting the grease-packed system and when to lubricate.
Instructions for cleaning and greasing the crank cap and handle assembly.
Emphasizes that repairs and maintenance should be done by authorized service centers.
To Next Page
