Makita HR5201C User Manual

3
Uncertainty (K) : 2.5 m/s
2
ENG306-1
Work mode : chiseling function with side grip
Vibration emission (a
h,CHeq
) : 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG303-2
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 17 m/s
2
Uncertainty (K) : 2 m/s
2
For Model HR5211C
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 100 dB(A)
Sound power level (L
WA
) : 111 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG216-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
h,CHeq
) : 11 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG306-1
Work mode : chiseling function with side grip
Vibration emission (a
h,CHeq
) : 8 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG303-2
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 12.5 m/s
2
Uncertainty (K) : 2 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-13
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Rotary Hamme
r
Model No./ Type: HR5201C,HR5210C,HR5211C
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30th January 2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.

Makita HR5201C Specifications

General

Brand	Makita
Model	HR5201C
Category	Rotary Hammer
Language	English