Need help?Do you have a question about the Makita HR5212C and is the answer not in the manual?
General| Cord length | 5 m |
|---|---|
| Input power | 1510 W |
| Power source | AC |
| AC input voltage | 230 V |
| Impact rate | 2250 bpm |
| Rated speed (max) | 260 RPM |
| Impact energy (max) | 19 J |
| Sound pressure level | 98 dB |
| Drilling diameter in steel (max) | - mm |
| Vibration level (hammer drilling) | 9 m/s² |
| Drilling diameter in concrete (max) | 45 mm |
| Chuck type | SDS Max |
| Adjustable speed | Yes |
Weight and Dimensions| Depth | 599 mm |
|---|---|
| Width | 140 mm |
| Height | 287 mm |
| Weight | 11884 g |
| Package weight | 19050 g |
Describes the tool's purpose for hammer drilling and chiseling in concrete and stone.
Details requirements for connecting the tool to a single-phase AC power supply.
Safety precautions related to keeping the work area clean, well-lit, and free of hazards.
Guidelines for safe electrical connections and avoiding electric shock.
Precautions for the operator's well-being, including alertness and protective equipment.
Instructions for proper operation, maintenance, and storage of power tools.
Explains how the tool's switch trigger and button control operation in different modes.
Describes how to adjust the speed and blows per minute using the dial.
Details how to change between hammer drilling and chiseling/demolition modes.
Instructions for attaching and positioning the auxiliary handle for safe operation.
Information on using the side grip for enhanced control during drilling.
How to set the angle of the bit for chipping, scaling, or demolition tasks.
How to install and use the depth gauge for consistent drilling depth.
Step-by-step guide for performing hammer drilling operations safely and effectively.
Step-by-step guide for performing chipping, scaling, and demolition tasks.
To Next Page
