To Next Page
E
edwardcarpenterAug 30, 2025
Why Makita RM350D Lawn Mower doesn't run?
- MManuel GreenAug 30, 2025
The Robotic Mower does not run during an error. Please, refer to the section for "PROTECTION SYSTEM."
Why Makita RM350D Lawn Mower doesn't run?
The Robotic Mower does not run during an error. Please, refer to the section for "PROTECTION SYSTEM."
What to do if my Makita RM350D does not return to the charging station?
If your Makita Lawn Mower is not returning to the charging station, and the guide wire is not installed, set the active search period of the guide signal to 0 minutes. If the mower does not depart from the charging station after the work area has been changed, have the mower depart from the station and let it save the surrounding magnetic field in its memory. If the mower cannot return by the boundary signal, install the boundary wire 1.5 m straight on both sides of the charging station.
Why is my Makita RM350D Lawn Mower operating at an unintended time or date?
If your Makita Lawn Mower is operating at an unintended time or date, check the date and time for scheduled mowing and change the mowing schedule.
Why does my Makita RM350D have a short mowing and charging time?
If your Makita Lawn Mower has a short mowing time and charging time, it may indicate that the end of the battery life is approaching.
Why does my Makita Lawn Mower travel, but the cutting blade motor does not rotate?
The blade motor does not rotate when the Makita Lawn Mower has just started driving or when it is returning to the charging station.
What to do if the battery of my Makita Lawn Mower is empty but not charged when docked in the charging station?
If the battery of your Makita Lawn Mower is empty but not charging when docked in the charging station, dock the mower to the charging station with the main power ON, and wait for a while until the charging starts.
Why doesn't the spiral cut work on my Makita RM350D Lawn Mower?
Spiral cutting works when it detects dense grass after about 30 minutes of normal lawn mowing for the Makita Lawn Mower.
Why is my Makita RM350D Lawn Mower not returning to the charging station?
If your Makita Lawn Mower is not returning to the charging station, there could be a few reasons. One possibility is that the mower is in the active search period of the guide signal and therefore not using the boundary signal. To resolve this, set the active search period of the guide signal to 0 minutes if the guide wire isn't installed. Another reason might be that the mower hasn't saved the surrounding magnetic field after a work area change. To fix this, have the mower depart from the charging station so it can save the surrounding magnetic field in its memory. Finally, the boundary wire near the charging station may be incorrectly installed. Make sure to install the boundary wire 1.5 m straight on both sides of the charging station.
What to do if my Makita RM350D cannot dock to the charging station?
If your Makita Lawn Mower cannot dock to the charging station, it may be due to a few reasons. First, check if the charging station is deformed and ensure it is placed firmly on a level surface. Also, the guidewire should be laid straight from the charging station for at least 2 meters. Finally, make sure the guidewire is properly secured to the groove in the center of the station base of the charging station.
What to do if the battery of my Makita RM350D is empty but not charging when docked?
If the battery of your Makita Lawn Mower is empty but not charging when docked in the charging station, it may take some time for the battery to start charging if it is fully discharged. Dock the Robotic Mower to the charging station with the main power ON, and wait for a while until the charging starts. If the problem persists, contact our sales office or local dealer.
General| Brand | Makita |
|---|---|
| Model | RM350D |
| Category | Lawn Mower |
| Language | English |
