To Next PageTo Next PageWhy Makita UC 3000, UC 3500, UC 4000 Chainsaw has no chain lubrication?
If there's no chain lubrication in your Makita Chainsaw, the oil tank might be empty, the oil guide groove could be dirty, or there might be an issue with the oil pump.
Why Makita UC 3000, UC 3500, UC 4000 Chainsaw has insufficient performance?
The insufficient performance of your Makita Chainsaw can be caused by low pulling power.
What causes chain brake problem in Makita UC 3000, UC 3500, UC 4000 Chainsaw?
A worn-down brake band can cause chain brake issues in your Makita Chainsaw.
General| Power | 1800 W |
|---|---|
| Oil tank capacity | 0.2 L |
| Chain pitch | 3/8 " |
| Power source | Electric (corded) |
| Guide bar length | 30 cm, 35 cm, 40 cm (depending on model) |
| Chain gauge | 1.3 mm |
Maintain a clear workspace to prevent injuries and ensure safe operation.
Always disconnect the saw before servicing or changing attachments.
Connect the saw to the correct voltage as specified on the nameplate.
Use caution in different environments and with specific wood types for safe cutting.
Prevent contact with grounded surfaces to avoid electric shock hazards.
Remain alert and focused while operating the chain saw to prevent accidents.
Ensure children do not contact the saw or work area to prevent accidents.
Inspect for damage and ensure proper function before further use.
Understand kickback causes and follow precautions to minimize risk.
Wear appropriate clothing and footwear for safe operation.
Wear safety glasses, footwear, snug clothing, gloves, and hearing protection.
Step-by-step guide to install the guide bar and saw chain correctly.
Procedure for properly tensioning the saw chain for safe operation.
Manual and automatic engagement of the chain brake.
How to disengage the chain brake for operation.
Instructions for safely refilling the chain oil tank.
Ensuring sufficient lubrication for the saw chain and guide bar.
Safety and procedural guidelines for felling trees.
Instructions and techniques for maintaining a sharp saw chain.
