To Next Page
C
Crystal MontoyaAug 20, 2025
Why my Makita Chainsaw chain does not start?
- Aamanda12Aug 20, 2025
If the chain of your Makita Chainsaw does not run, the chain brake might be engaged. In this case, release the chain brake.
Why my Makita Chainsaw chain does not start?
If the chain of your Makita Chainsaw does not run, the chain brake might be engaged. In this case, release the chain brake.
What to do if my Makita UC3551A Chainsaw does not start?
If your Makita Chainsaw does not start, it could be due to a few reasons. First, ensure that the chainsaw is properly connected to a power supply and that the power supply is working. If the cable is defective or there is a tool malfunction, stop using the tool immediately.
Why my Makita Chainsaw does not start?
Your Makita Chainsaw might not be starting due to several reasons. First, ensure it is properly connected to a working power supply, and check the power supply itself. If the cable is defective or the tool has malfunctioned, stop using it immediately and seek assistance from your local authorized service center.
Why is there no oil on the chain of my Makita UC3551A?
If there's no oil on the chain of your Makita Chainsaw, possible causes include an empty oil tank, a dirty oil guide groove, or an incorrectly adjusted oil pump adjusting screw. To resolve this, fill the oil tank, clean the groove, or adjust the oil pump feed rate.
What to do if the chain of my Makita UC3551A Chainsaw does not run?
If the chain of your Makita Chainsaw does not run, it's possible that the chain brake is engaged. To fix this, release the chain brake.
What to do if Makita UC3551A chain does not stop when the chain brake is engaged?
If the chain on your Makita Chainsaw does not stop even when the chain brake is engaged, it indicates that the brake band is worn down. Stop using the tool immediately.
What to do if no oil on the chain of my Makita Chainsaw?
If there is no oil on the chain of your Makita Chainsaw, the oil tank might be empty, so refill it. Another possibility is a dirty oil guide groove, which you should clean. Finally, check the oil pump adjusting screw and adjust the oil pump feed rate if it's incorrectly set.
What to do if my Makita Chainsaw has no oil on the chain?
If there is no oil on the chain of your Makita Chainsaw, the oil tank might be empty. Refill the oil tank. Alternatively, the oil guide groove could be dirty, in which case you should clean the groove. Finally, the oil pump adjusting screw might not be correctly adjusted, so adjust the oil pump feed rate.
What to do if my Makita UC3551A vibrates abnormally?
If your Makita Chainsaw is vibrating abnormally, it could be due to a loose guide bar or saw chain, or a tool malfunction. Try adjusting the guide bar and saw chain tension. If the issue persists, stop using the tool immediately.
What to do if chain does not stop even the chain brake is engaged on my Makita Chainsaw?
If the chain on your Makita Chainsaw continues to run even when the chain brake is engaged, it could be due to a worn-down brake band. In this case, stop using the tool immediately and consult your local authorized service center. Alternatively, the guide bar or saw chain might be loose; in this case, adjust the tension of the guide bar and saw chain.
Displays graphical symbols used for safety and operation of the chain saw.
Clarifies the specific purpose and application for which the tool is designed.
Outlines the electrical requirements and connection guidelines for the tool.
Provides guidelines for maintaining a safe and organized working environment.
Details precautions to prevent electric shock and ensure safe electrical connections.
Covers operator alertness, protective gear, and safe handling practices.
Best practices for operating and maintaining the power tool safely.
Specific safety instructions and precautions for operating a chain saw.
Instructions on correct application and limitations of the chain saw usage.
Essential protective gear required for safe operation of the chain saw.
Measures to prevent electrical hazards and ensure user safety.
General guidelines for safe operation and avoiding common hazards.
Explains kickback causes, prevention methods, and operator response for chain saws.
Description of the chain brake mechanism and its function in stopping the chain.
Explanation of the run-down brake for immediate chain stoppage after switch release.
Guidelines for safe handling, transport, and storage of the chain saw.
Routine checks and upkeep procedures necessary for the tool's longevity.
Procedures to follow and information to provide in case of an accident.
Step-by-step instructions to remove and install the sprocket cover.
Instructions for detaching and attaching the saw chain to the guide bar.
How to properly connect and secure an extension cord to the tool.
How to operate the switch trigger and lock-off button for starting/stopping.
Procedure for lubricating the saw chain and bar for optimal performance.
How to verify and adjust the saw chain tension for safety and performance.
Verifying the proper functioning of the switch trigger before use.
How to check the oil level and delivery for proper chain lubrication.
How to adjust the oil pump feed rate for optimal lubrication.
Techniques and safety precautions for cutting branches from a felled tree.
Special cutting techniques requiring caution and training due to kickback risk.
Procedures and safety guidelines for cutting down trees, including escape paths.
Instructions for cleaning the chain saw body, handles, and components.
Inspecting the tool's housing for any signs of damage or wear.
Method for sharpening the saw chain using a file and proper guiding techniques.
Recommendations for using and maintaining new saw chains for even wear.
Ensuring proper function of the chain and braking systems through regular checks.
Proper procedures for storing the chain saw for extended periods to preserve oil quality.
List of recommended accessories and attachments for the chain saw.
General| Power source | AC |
|---|---|
| Idle speed | 7500 RPM |
| Chain gauge | 1.3 mm |
| Chain pitch | 3/8 \ |
| Chain speed | 14.5 m/s |
| Blade length | 320 mm |
| Product color | Black, Turquoise |
| Automatic oiling | Yes |
| Chain bar length | 350 mm |
| Oil tank capacity | 0.2 L |
| Kickback protection | - |
| Noise level | 101.8 dB |
| Uncertainty K | 1.5 m/s² |
| Standard deviation | 2.5 dB |
| Vibration emission | 3.9 m/s² |
| Sound pressure level | 90.8 dB |
Weight and Dimensions| Width | 201 mm |
|---|---|
| Height | 220 mm |
| Length | 505 mm |
| Weight | 5500 g |
