Why is there no oil on the chain of my Makita UC4041A Chainsaw?
If there's no oil on the chain of your Makita Chainsaw, possible causes include an empty oil tank, a dirty oil guide groove, or an incorrectly adjusted oil pump adjusting screw. To resolve this, fill the oil tank, clean the groove, or adjust the oil pump feed rate.
General| Power source | AC |
|---|---|
| Idle speed | 7820 RPM |
| Chain gauge | 1.27 mm |
| Chain pitch | 3/8 \ |
| Chain speed | 14.5 m/s |
| Blade length | 360 mm |
| Cable length | 0.3 m |
| Product color | Black, Turquoise |
| Automatic oiling | Yes |
| Chain bar length | 400 mm |
| Oil tank capacity | 0.2 L |
| Noise level | 101.3 dB |
| Uncertainty K | 1.5 m/s² |
| Standard deviation | 2.5 dB |
| Vibration emission | 4.7 m/s² |
| Sound pressure level | 90.3 dB |
Weight and Dimensions| Width | 245 mm |
|---|---|
| Height | 200 mm |
| Length | 455 mm |
| Weight | 4700 g |
To Next Page
