Why is there no oil on the chain of my Makita UC3541A?
If there's no oil on the chain of your Makita Chainsaw, possible causes include an empty oil tank, a dirty oil guide groove, or an incorrectly adjusted oil pump adjusting screw. To resolve this, fill the oil tank, clean the groove, or adjust the oil pump feed rate.
What to do if Makita UC3541A chain does not stop when the chain brake is engaged?
If the chain on your Makita Chainsaw does not stop even when the chain brake is engaged, it indicates that the brake band is worn down. Stop using the tool immediately.
What to do if my Makita Chainsaw vibrates abnormally?
If your Makita Chainsaw is vibrating abnormally, it could be due to a loose guide bar or saw chain, or a tool malfunction. Try adjusting the guide bar and saw chain tension. If the issue persists, stop using the tool immediately.
What to do if the chain of my Makita Chainsaw does not run?
If the chain of your Makita Chainsaw does not run, it's possible that the chain brake is engaged. To fix this, release the chain brake.
General| Power source | AC |
|---|---|
| Idle speed | 7820 RPM |
| Chain gauge | 1.27 mm |
| Chain pitch | 3/8 \ |
| Chain speed | 14.5 m/s |
| Blade length | 325 mm |
| Product color | Black, Turquoise |
| Automatic oiling | Yes |
| Chain bar length | 350 mm |
| Oil tank capacity | 0.2 L |
| Noise level | 101.3 dB |
| Uncertainty K | 1.5 m/s² |
| Standard deviation | 2.5 dB |
| Vibration emission | 4.3 m/s² |
| Sound pressure level | 90.3 dB |
Weight and Dimensions| Width | 245 mm |
|---|---|
| Height | 200 mm |
| Length | 455 mm |
| Weight | 4700 g |
Crucial initial instruction to read the manual before operating the saw.
Important safety instruction related to noise exposure.
Rules for safe use of electricity with the tool.
Measures to ensure operator safety during use.
Best practices for operating and maintaining the tool.
Guidelines for tool maintenance and repair.
Specifies the correct applications for the chain saw.
Recommended gear for operator safety.
Measures to prevent electrical hazards.
General advice for safe operation in various conditions.
How the chain brake functions to stop the saw.
Explains run-down brake, hand guards, and chain catcher.
Proper methods for moving and storing the chain saw.
General approach to tool maintenance.
Step-by-step guide for chain removal and installation.
How to check and adjust saw chain tension before use.
Verifying the switch trigger and lock-off button functionality.
Ensuring the chain brake engages and stops the chain.
Verifying the chain stops quickly after switch release.
Inspecting oil level and delivery for proper chain lubrication.
How to cut logs using the spike bumper as a pivot.
Guidance for cutting branches off a felled tree.
Burrowing and parallel-to-grain cuts requiring training.
Information on tree felling safety and procedures, noting it's for trained persons.
Instructions for cleaning the saw and handles.
Regular inspection of the saw's housing for damage.
Proper use of files and guides for sharpening saw chain cutters.
Cleaning oil grooves and feed holes in the guide bar.
Tips for using new chains and wear management.
Importance of inspecting and maintaining braking systems.
Proper procedures for storing the chain saw for extended periods.
To Next Page
