Why is there no oil on the chain of my Makita UC3041A Chainsaw?
If there's no oil on the chain of your Makita Chainsaw, possible causes include an empty oil tank, a dirty oil guide groove, or an incorrectly adjusted oil pump adjusting screw. To resolve this, fill the oil tank, clean the groove, or adjust the oil pump feed rate.
What to do if Makita UC3041A Chainsaw chain does not stop when the chain brake is engaged?
If the chain on your Makita Chainsaw does not stop even when the chain brake is engaged, it indicates that the brake band is worn down. Stop using the tool immediately.
What to do if my Makita UC3041A vibrates abnormally?
If your Makita Chainsaw is vibrating abnormally, it could be due to a loose guide bar or saw chain, or a tool malfunction. Try adjusting the guide bar and saw chain tension. If the issue persists, stop using the tool immediately.
What to do if the chain of my Makita UC3041A Chainsaw does not run?
If the chain of your Makita Chainsaw does not run, it's possible that the chain brake is engaged. To fix this, release the chain brake.
General| Power source | AC |
|---|---|
| AC input voltage | 230 V |
| Idle speed | 7820 RPM |
| Chain gauge | 1.1 mm |
| Chain pitch | 3/8 \ |
| Chain speed | 14.5 m/s |
| Blade length | 265 mm |
| Cable length | 0.3 m |
| Product color | Black, Turquoise |
| Automatic oiling | Yes |
| Chain bar length | 300 mm |
| Oil tank capacity | 0.2 L |
| Noise level | 104 dB |
| Uncertainty K | 1.5 m/s² |
| Sound power level | 101.3 dB |
| Standard deviation | 2.5 dB |
| Vibration emission | 4.7 m/s² |
| Sound pressure level | 90.3 dB |
Weight and Dimensions| Width | 246 mm |
|---|---|
| Height | 201 mm |
| Length | 455 mm |
| Weight | 4600 g |
Explains kickback and how to avoid it.
Lists recommended protective gear for chain saw operation.
How to verify and adjust the chain tension.
Process of cutting down trees safely.
To Next Page
