Makita VC3510 - Troubleshooting

- 17 -
EN
PROBLEMS ?
PROBLEMS
• Theappliancewillnot
start.
• Reducedefciency
• Therpmrateofthe
motor is noticeably
higher.
• Theappliancewillnot
start in “power tool”
mode.
SOLUTIONS
• Checkthatthepowersocket
is working.
• Contactyourtechnical
service centre
• Emptydrum
• Thoroughlycleanorchange
theltercartridge.
• Checkthehoseor
accessories.
• Checkthedrum.
• Thoroughlycleanorchange
theltercartridge.
• Checkthehoseor
accessories.
• Contactyourtechnical
service centre
CAUSES
• Nopower.
• Defectivepowercord,
switches, or motor.
• Drumtoofull.
• Filter cartridge is dirty or
caked.
• Cloggedtubeor
accessories.
• Drumtoofull
• Filtercartridgeisdirtyor
caked.
• Cloggedtubeor
accessories.
• Defectivecircuitboard.
For EU countries only
Do not dispose of electrical appliances with household waste!
In compliance with European Directives 2002/96/EC and 2003/108/EC on waste
electrical and electronic equipment (WEEE) and its implementation in accordance
with national law, electric tools that have reached the end of their lifecycle must be
collected separately and returned to an environmentally compatible recycling facility.