EasyManuals Logo

Makita XLC05 User Manual

Makita XLC05
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7 ENGLISH
NOTE: The timing, at which the lamp starts blinking,
depends on the temperature at work place and the
battery cartridge conditions.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Dust bag and paper lter
Install either dust bag or paper lter before using
cleaner.
Use the dust stopper when installing either dust bag or
paper lter.
Dust bag are usable many times repeatedly by cleaning
it out.
Paper lter is a throw-away type. Throw away the entire
paper lter without emptying when it has become full.
NOTICE: To prevent dust from getting into the
motor:
Make sure that the dust bag or paper lter is
installed before use.
Insert the dust stopper together with the
dust bag or paper lter all the way into the
slots when installing them.
Do not use a broken or ripped bag.
Otherwise the motor may be broken.
NOTICE: Do not fold the cardboard at its open-
ing when installing the paper lter.
NOTICE: Never throw away the dust stopper
because it needs to be used repeatedly whenever
either the dust bag or the paper lter is used.
NOTICE: The paper lter for the cleaner is an
important component for maintaining the tool
performance. Using other than the genuine paper
lter may cause smokes or ignition.
NOTE: When the dust bag or the paper lter is not
installed in the cleaner, the front cover does not close
completely.
Installing dust bag
Use the dust stopper when installing dust bag. Be
careful not to take the upper side for the lower side by
mistake because they are different each other.
1
2
1. Upper side of dust stopper 2. Lower side of dust
stopper
1. Insert the protrusion of the dust bag into the lower
groove on the dust stopper as shown in the gure.
1
2
3
1. Dust stopper 2. Lower groove 3. Dust bag
2. There is no distinction between the upper and
lower sides of the dust bag. You may insert its protru-
sion of either side into the lower groove of the dust
stopper.
1
1. Lower groove

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita XLC05 and is the answer not in the manual?

Makita XLC05 Specifications

General IconGeneral
BrandMakita
ModelXLC05
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals