Need help?Do you have a question about the Makita XOP02 and is the answer not in the manual?
General| Type | Random Orbit Sander |
|---|---|
| Battery Voltage | 18V |
| Battery Type | Lithium-Ion |
| Variable Speed Control | Yes |
| Dust Extraction | Yes |
| Pad Size | 5" (125 mm) |
Lists compatible battery cartridges and chargers for the tool.
General safety guidelines for operating power tools to prevent injury.
Safety precautions related to electrical hazards when using power tools.
Importance of wearing appropriate protective gear like eye protection and safety shoes.
How to prevent accidental tool startup before connecting power or battery.
Advice on maintaining balance, footing, and avoiding loose clothing.
Use the right tool for the job to ensure safety and efficiency.
Guidelines for tool maintenance and handling faulty switches.
Instructions for charging, handling, and storing battery packs safely.
Warnings regarding battery damage, leaks, and exposure to heat.
Operate tool only when hand-held; check workpiece support.
Inspect pad for cracks; check bolt heat; test after dropping.
Do not disassemble, short, drop, or use damaged batteries.
Follow local disposal rules and use batteries only with specified products.
Instructions for safely installing and removing the battery cartridge.
How to check the remaining battery charge using indicator lamps.
Explanation of the system that protects against overload and overdischarge.
Tool stops automatically due to overheating or low battery; how to handle.
Details on operating the switch trigger, lock button, and trigger-lock.
Guide on how to adjust the tool's rotating speed using the dial.
Orbital action with free rotation for fine polishing.
Mode for finishing operations without applying excessive load.
Orbital action with forced rotation for rough polishing.
Tool prevents starting if battery installed with trigger pulled or locked.
Features for maintaining speed and smooth startup.
Steps to install the backing pad onto the tool's shaft.
How to install the optional side grip for better handling.
Instructions for attaching and detaching polishing pads.
General guidance for operating the polisher for various tasks.
Using wool and sponge pads for rough and fine finishing.
Procedures for applying and removing wax using sponge pads.
How to clean dust covers for ventilation to ensure smooth air circulation.
To Next Page
