Why does my Makita XRU15 motor stop running after a little use?
If your Makita Trimmer motor stops shortly after starting, it could be due to a low battery charge—recharge the battery, and replace it if recharging isn't effective. Another cause might be overheating—stop using the tool and allow it to cool down.
What to do if cutting tool and motor cannot stop on Makita Trimmer?
If the cutting tool and motor of your Makita Trimmer won't stop, immediately remove the battery. This issue may indicate an electric or electronic malfunction.
Why Makita XRU15 Trimmer does not reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, check if the battery is installed properly according to the manual. Also, the battery power might be dropping, so try recharging or replacing the battery. If the issue persists, the drive system may not be functioning correctly.
What to do if cutting tool does not rotate on Makita XRU15?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! A foreign object, like a branch, may be jammed between the guard and the cutting tool. If so, remove the foreign object.
What to do if my Makita Trimmer motor does not run?
If the motor of your Makita Trimmer doesn't start, possible causes include: the battery cartridge might not be installed—ensure it is properly installed. The battery may be under voltage—try recharging it, and if that doesn't work, replace the battery. If these steps don't resolve the issue, the drive system may not be working correctly.
What to do if Makita XRU15 Trimmer has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be because one end of the nylon cord has broken. To fix this, tap the nylon cutting head against the ground while it is rotating to feed the cord.
Lists compatible battery cartridges and chargers for the mower.
General safety precautions to reduce risks of fire, shock, and injury.
Instructions on safe operating locations and conditions.
Steps to follow when the mower hits an object during operation.
Guidelines for professional servicing and repair of the tool.
Explains the meaning of symbols used in the manual.
Critical safety guidelines specifically for battery cartridges.
Step-by-step guide to attach the mower handle.
Procedure to detach the mulching plug from the mower.
Procedure to attach the mulching plug to the mower.
Instructions for fitting and removing the grass collection basket.
Guide on how to install and remove the battery cartridge.
Steps to attach the discharge attachment for grass dispersal.
Details on automatic protection systems for the tool and battery.
How to check the remaining battery charge level.
How to select and switch between installed battery cartridges.
Explanation of the overload protection system and its indicators.
Explanation of the overheat protection system and its indicators.
Explanation of the overdischarge protection system and its indicators.
Instructions for operating the main power switch.
How to switch between normal and noise reduction modes.
Step-by-step guide to adjust the cutting height of the mower.
General advice and safety precautions for mowing the lawn.
How to safely cut long grass in stages.
Procedure for safely emptying the grass collection basket.
Instructions for safely carrying the mower by two people.
Guidelines for storing the mower indoors in a safe location.
Safety precautions and steps for blade removal and installation.
Detailed steps for safely removing the mower blade.
Detailed steps for safely installing the mower blade.
General| Motor Type | Brushless |
|---|---|
| Voltage | 18V |
| Type | String Trimmer |
| Line Diameter | 0.080 inches |
| Battery Type | Lithium-Ion |
| Speed | 6500 rpm |
| Spindle Size | M10 x 1.25 |
To Next Page
