Why doesn't my Makita Trimmer reach maximum RPM?
Your Makita Trimmer might not be reaching maximum RPM because the battery is installed improperly (install the battery cartridge as described in this manual) or the battery power is dropping (recharge or replace the battery).
What to do if Makita Trimmer cutting tool and motor cannot stop?
If the cutting tool and motor of your Makita Trimmer cannot stop, it may be caused by an electric or electronic malfunction. Remove the battery immediately.
Why does my Makita XRU13Z motor not run?
The motor of your Makita Trimmer might not be running due to several reasons: the battery cartridge might not be installed properly (install it correctly), the battery might be under voltage (recharge or replace it), or the drive system may not be working correctly.
What to do if my Makita XRU13Z Trimmer motor stops running after a little use?
If your Makita Trimmer's motor stops after a short period, it could be due to a low battery charge (recharge or replace the battery). Another possibility is overheating, in which case you should stop using the tool and allow it to cool down.
General| Type | String Trimmer |
|---|---|
| Motor | Brushless |
| Voltage | 18V |
| Cutting Width | 13" |
| Battery Type | Lithium-Ion |
| Line Diameter | 0.080" - 0.095" |
| Power Source | Battery |
| Battery Compatibility | 18V LXT Lithium-Ion |
| No Load Speed | 6, 500 RPM |
Details the model, performance, voltage, and weight of the cordless grass trimmer.
Lists compatible Makita battery cartridges and chargers for the tool.
Provides crucial safety precautions and general instructions for operating the trimmer.
Specifies the proper applications and limitations of the grass trimmer.
Lists essential protective gear required for safe operation of the tool.
Covers critical safety guidelines related to electricity and battery handling.
Guides on how to safely start the tool and operate it correctly.
Details the proper techniques for using the grass trimmer effectively and safely.
Instructions for regular inspection, cleaning, and upkeep of the tool.
Essential safety guidelines, handling, and tips for maximizing the life of the battery.
Explanation of symbols and abbreviations used throughout the manual.
Explains how the tool protects itself and the battery from overload, overheat, and overdischarge.
How to check the remaining battery power using indicator lamps.
Instructions on how to activate and deactivate the tool's power switch safely.
Details the main power button, lock-off lever, switch trigger, and automatic shut-off feature.
How to change the rotation speed of the trimmer using the main power button.
Explains the function and usage of the reverse button for clearing entangled debris.
Information about the cutting head and how to adjust the shaft length.
Steps for assembling the handle and installing the protector.
Guides on attaching the protector and wire guard for safety.
Instructions for fitting the nylon cutting head accessory.
Guidelines for safe and effective operation, including positioning and bystander safety.
Instructions for connecting and adjusting the shoulder harness for user comfort.
Steps to remove the spool for maintenance or replacement.
Detailed guide on how to rewind or replace the nylon cutting line.
Identifies probable causes and remedies for common tool malfunctions.
Lists recommended optional accessories and attachments for the tool.
To Next Page
